
nVader Equipment
nVader™ Sprinter 144 Running Boards
Indexed listing. WNDR Built doesn't sell this product; the button opens flarespace.com.
Side-door steps with a flat-bar tread area
The nVader running boards provide steps at the driver’s door, front passenger door and sliding side door. Their design combines an outer tube with a flat-bar interior to create the tread area, rather than using tubes throughout. nVader describes this layout as providing more foot room and keeping small paws and toes clear of gaps.
Injection-molded tread plates cover the stepping surface and can be removed to clean away mud and snow. The boards combine steel and aluminum construction, with powder-coated steel tube frames. The longer passenger-side board serves both passenger-side entrances, while the shorter driver-side board serves the driver’s door.
Removable tread plates
Injection-molded tread plates can be removed for cleaning mud and snow.
Powder-coated frame
The steel tube frames are powder-coated; nVader states the boards are made in the USA.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by nVader Equipment
- Mercedes Sprinter 144"
Drilling required
The installation guide requires drilling the lower pinch weld for the mounting brackets, using ⅛” pilot holes opened with a ¼” bit, then applying self-etching primer to exposed metal.
Installation supplies
Blue Loctite 243, self-etching primer and the listed installation tools are not included.
Bracket positions
Driver-side brackets are numbered 1 and 5; passenger-side brackets are numbered 1–4 and are location-specific.
Specs, parts & installation
Construction
| Materials | Steel and aluminum |
|---|---|
| Frame | Powder-coated steel tube |
| Tread plates | Injection-molded |
| Manufacture | Made in the USA |
Dimensions & weight
| Passenger-side length | 124" |
|---|---|
| Driver-side length | 58" |
| Step width | 5 7/8" |
| Driver-side weight | 28 lbs |
| Passenger-side weight | 38 lbs |
What’s in the box
Running boards
- 1 driver-side running board
- 1 passenger-side running board
Mounting brackets
- 2 driver-side mounting brackets, numbered 1 and 5
- 4 passenger-side mounting brackets, numbered 1–4
Mounting hardware
The guide lists zinc-plated flat washers, 8mm-1.25 flag bolts, 8mm-1.25 black stainless steel serrated flange nuts, 8mm black oxide stainless steel flat washers, 8mm-1.25 × 25mm black oxide stainless steel hex-head bolts, 6mm-1.0 × 20mm black oxide stainless steel button-head bolts and 6mm-1.0 black oxide stainless steel nylon lock nuts. Mounts, bolts and nuts are packed in the smaller box with the driver-side running board.
Installation at a glance
The guide recommends two people; if a helper is unavailable, it recommends a jack and the equivalent of three 2x4s to assist.
Mounting brackets attach through body-plug openings and drilled pinch-weld holes. Apply self-etching primer to drilled metal and allow it to dry; use Blue Loctite 243 as directed.
Mount both running boards on their brackets and verify that each stepping surface is level before final tightening.
Tools and supplies listed in the guide
- 10mm socket; 13mm socket; 4mm Allen wrench; torque wrench.
- ⅛” drill bit; ¼” drill bit; self-etching primer; Blue Loctite 243.
- A torpedo level or leveler app is recommended.
Final tightening from the installation guide
- The guide specifies 14 ft lbs or 19.98 Nm for the 8mm flag-bolt nuts and running-board mounting bolts.
- The guide specifies 6.4 ft lbs or 8.67 nm for the lower 6mm nylon lock nuts along the pinch weld.
Source notes
- The nVader Running Boards guide (REV 4.20.26), page 5, lists 8mm flat washers but no 6mm flat washers; pages 8, 10 and 11 require 6mm flat washers on both sides of the pinch weld. The disputed washer counts are omitted from the contents list.
Lead Time
This product
The product page advertises fast, free shipping.
Warranty
nVader exterior products: 1-year limited warranty for the original purchaser; proper installation required.
Read nVader Equipment warranty policy on WNDR BuiltReturns
Flarespace purchases: cancel within 24 hours; non-fiberglass returns assessed case by case; refunds deduct shipping costs and a 4% processing fee; faulty products replaced at no cost.
This product
The product-page Cancellation/Return Policy instead allows cancellations within 24 hours and evaluates other non-fiberglass, non-bedding products for returns or exchanges case by case. Any refund is minus shipping costs and a 4% processing fee.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon