
Flatline Van Co.
Sprinter Van Side Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Side access to the Sprinter roof-rack area
This fixed side ladder provides a route to roof-mounted gear, solar panels and rooftop decking. It attaches to stock or aftermarket roof tracks at the top and a pinch-seam bracket at the bottom.
The round-tube frame has a double bend that follows the Sprinter’s body lines. The guide also includes a chassis support bracket for installations where that bracket applies.
Dimpled steps
Formed aluminum steps have dimples that Flatline says add traction.
Two-piece assembly
Upper and lower ladder sections join with two bayonet couplers and threadlocked fasteners.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2007+ Sprinter 1500/2500/3500/3500XD | 144"/170"/170" EXT | High Roof
144 in vans with tilt/pop-out windows
Flatline recommends its Sprinter Wheel Wrap Side Ladder instead for a 144 Sprinter with tilt/pop-out windows.
Drilling required
The guide calls for pinch-seam pilot holes. If the chassis support bracket is used, it also requires a 1/2 in hole through the chassis beam.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Roof attachment
Mounts to stock or aftermarket roof rails/tracks at the top and the pinch seam at the bottom.
Access around other equipment
The guide notes that mounted accessories may need to be loosened or temporarily removed to reach the roof rail and pinch seam.
Installer requirement
Flatline recommends professional installation of aftermarket accessories; its guide requires a professional installer or other qualified person if you have no mechanical experience and are not thoroughly familiar with the installation procedures.
Before use
Flatline requires checking mounting points and attachments before use and regularly inspecting the product for wear or damage.
Specs, parts & installation
Frame & steps
| Frame | 1.25 in round aluminum tube |
|---|---|
| Steps | Formed and dimpled aluminum |
| Step width | 12 3/4 in |
| Product weight | 18 lb |
What’s in the box
Ladder & supports
Upper and lower ladder sections, two bayonet couplers, one mounting plate and one chassis support bracket.
Mounting supplies
Hardware for stock or aftermarket roof tracks, including rail nuts, screws, washers and locknuts, plus a 5 ml bottle of threadlocker.
Installation at a glance
Flatline’s guide estimates 1 hour and suggests additional help for some steps.
Join the ladder sections, loosely attach the upper mount to the roof-track nuts and position the lower mounting plate against the pinch seam. Keep the ladder vertical, drill the lower pilot holes, install the lower fasteners and tighten the mounts. Fit the chassis support bracket if applicable.
Tools listed in the guide
- 9/16 in and 7/16 in wrench or socket; 7/32 in and 5/32 in Allen wrench.
- Power drill with 1/2 in and 1/8 in drill bits.
Lower fastener access
- Use the mounting plate as the guide for the pinch-seam holes.
- The holes behind the ladder uprights require removing the ladder unless a 90-degree drill head provides access.
- The guide permits substituting 1/4-20 bolts and nuts for the self-drilling screws.
Lead Time
Flatline’s FAQ lists in-stock dispatch in 1–2 business days and free lower-48 shipping; its Shipping policy lists flat-rate/economy options, with no-charge economy sometimes offered for longer lead times and typical LTL delivery of 7–21 business days.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
Flatline’s Refund policy gives the original purchaser a one-year, non-transferable limited warranty covering product cost only, excluding installation, labor, freight and damage from racing, competition or trail use; alteration, modification or improper installation voids coverage.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Flatline’s Refund policy accepts returns with a pre-authorized RMA within 30 days of receipt for unused, resalable items in original packaging, with a 20% restocking fee and customer-paid return shipping unless Flatline erred; freight returns require coordination, clearance/garage-sale/final-sale items are excluded, and custom or made-to-order items may be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon