
Flatline Van Co.
Sprinter Van Rear Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Roof access from either Sprinter rear door
This ladder places roof access on the rear door rather than the side of the van. Flatline makes separate versions for the driver and passenger doors, with a round aluminum frame and formed aluminum sheet-metal steps.
The ladder bolts through the door into upper and lower backer plates. The guide secures the lower plate with two self-drilling screws for added rigidity.
Black powder coat
The ladder is powder-coated black.
Mounting hardware
Black stainless mounting hardware is supplied.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2007+ Sprinter 1500/2500/3500/3500XD | 144"/170"/170" EXT | High Roof
Choose the rear door
Select the ladder made for the door where it will be installed.
Driver
- For the driver-side rear door.
Passenger
- For the passenger-side rear door.
Drilling required
The ladder requires holes through the rear door for its mounting bolts; two self-drilling screws also fasten the lower backer plate.
VS30 vans with 270° hinges
The ladder may contact the van’s side with the door fully open. Flatline says to add a rubber bumper or neoprene cushion wherever contact could occur to protect the paint.
NCV3 bumper clearance
The guide says to align the ladder to rest on the side bumper with the door fully open. If it conflicts with the back-door bumper, use a shorter bumper or adjust the ladder position.
California Proposition 65
Flatline warns that this product can expose you to Carbon Black and Titanium Dioxide, which California identifies as causing cancer.
Installer requirement
Flatline recommends professional installation of aftermarket accessories; its guide requires a professional installer or other qualified person if you have no mechanical experience and are not thoroughly familiar with the installation procedures.
Before use
Flatline requires checking mounting points and attachments before use and regularly inspecting the product for wear or damage.
Specs, parts & installation
Frame & finish
| Frame | 1.25 in round aluminum tube |
|---|---|
| Steps | Formed aluminum sheet metal |
| Finish | Black powder coat |
| Hardware | Black stainless hardware |
What’s in the box
Ladder & backer plates
One ladder for the selected rear door, one upper backer plate and one lower backer plate.
Mounting hardware
Four mounting screws with washers and locknuts, plus two self-drilling screws with sealing washers.
Installation at a glance
Flatline’s guide estimates 1 hour and suggests additional help for some steps.
Remove the lower interior panel if applicable and clear obstructions behind the mounting areas. Mark and drill the mounting holes, fit the backer plates, bolt the ladder to the door and secure the lower plate with the self-drilling screws.
Tools listed in the guide
- 9/16 in wrench or socket, 7/16 in socket and 7/32 in Allen key.
- Power drill, 13/32 in drill bit, measuring tape, marker, panel-removal tool, painter’s tape and rust-preventative paint.
Hole positioning & sealing
- The lower-hole measurements in the guide are guidelines only; verify all measurements before drilling.
- Flatline recommends painting the raw edges around the drilled holes.
- Automotive-grade sealant behind the bolts is optional, not required.
Lead Time
Flatline’s FAQ lists in-stock dispatch in 1–2 business days and free lower-48 shipping; its Shipping policy lists flat-rate/economy options, with no-charge economy sometimes offered for longer lead times and typical LTL delivery of 7–21 business days.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
Flatline’s Refund policy gives the original purchaser a one-year, non-transferable limited warranty covering product cost only, excluding installation, labor, freight and damage from racing, competition or trail use; alteration, modification or improper installation voids coverage.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Flatline’s Refund policy accepts returns with a pre-authorized RMA within 30 days of receipt for unused, resalable items in original packaging, with a 20% restocking fee and customer-paid return shipping unless Flatline erred; freight returns require coordination, clearance/garage-sale/final-sale items are excluded, and custom or made-to-order items may be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon