
Front Runner
Front Runner RAM Pro Master 1500 (136" WB/Low Roof) (2014-Current) Slimpro Roof Rack Kit
Indexed listing. WNDR Built doesn't sell this product; the button opens dometic.com.
Roof cargo space arranged around your equipment
This Slimpro roof rack gives a RAM Pro Master a platform for carrying travel gear or work equipment such as ladders and pipes. Its adjustable slats can be spaced around rooftop equipment, including air conditioning units, skylights and vents, so the rack layout can accommodate equipment already on the roof.
The slats slide into the side profiles and can be repositioned after assembly. The supplied Z brackets can also be inverted to lower the rack rather than leaving them in their standard position. Front Runner lists compatibility with most Front Runner side mount accessories, allowing the platform to be configured for different gear and accessory arrangements.
Aluminium and steel construction
Black epoxy powder-coated T6 aluminium and high strength steel.
T-slot attachment
The slat T slots and side profiles accept standard M8 hex bolts on the top and bottom.
Two-piece wind deflector
The kit includes left-hand and right-hand wind deflector sections.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Front Runner
- RAM Pro Master 1500 · 136" WB · Low Roof · 2014-Current
- Vehicle length: 5427mm / 213.7".
Roof A/C spacing
If a roof A/C is fitted, the fitting guide specifies spacing the slats around it at 202mm increments on shorter lengths and 404mm on longer lengths; slats can be positioned in front of and behind the unit.
Vehicle roof load limit
Front Runner warns that its rack kits often have a higher load rating than the vehicles they mount to; follow your specific vehicle manufacturer’s recommended roof rating and stated load capacity.
Installer experience
Read and understand all instructions and precautions before installation or use. If you do not understand them, or have no mechanical experience and are not thoroughly familiar with the installation procedures, Front Runner says a professional installer or other qualified person should install the rack.
Attachment checks
Check attachments before use and periodically inspect the rack for adjustment, wear and damage, as required by the fitting guide.
California warning
The maker’s product page warns: Cancer or reproductive harm — www.P65Warnings.ca.gov.
Accessory compatibility
Front Runner lists compatibility with most Front Runner side mount accessories.
Additional slats
Additional narrow slats can be added; these are sold separately.
Specs, parts & installation
Construction
| Materials | Black epoxy powder-coated T6 aluminium; high strength steel |
|---|---|
| Attachment slots | Slat T slots and side profiles accept standard M8 hex bolts, top and bottom |
Rack size and weight
| Load-carrying area | 2974mm (117.1") L x 1565mm (61.6") W |
|---|---|
| Assembled rack kit dimensions | 2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H |
| Approximate installed weight | 31.49kg (69.42lbs) |
| Mounting feet | 6 |
Shipping
| Width | 300mm (12") |
|---|---|
| Length | 1805mm (71") |
| Height | 195mm (8") |
| Weight | 35.35kg (78lbs) |
What’s in the box
Side profiles and joiners
2 x 1358mm side profiles and 2 x 1560mm side profiles; 1 van rack joiner kit containing 2 joiner bars, 2 joiner plates and 8 M6 x 16 button head bolts; 4 side profile end caps.
Slats and brackets
8 narrow slats, 16 narrow slat end caps and 16 slat Z brackets; 32 M8 x 20 hex head bolts, 16 M8 x 16 button head bolts, 48 M8 Nyloc nuts and 32 M8 nut caps.
Mounting feet
6 feet and 6 inner foot plates; 24 M8 x 16 x 1.6 flat washers, 12 M8 x 16 button head bolts, 24 M8 Nyloc nuts, 6 rubber U pieces (90mm long), 6 rubber U pieces (50mm long) and 24 M8 nut caps.
Wind deflector
1 van rack wind deflector assembly: left-hand and right-hand sections, 4 Schnorr washers, 4 M8 x 12 button head bolts and 4 M8 thin nuts; the product page lists a 30mm lip.
Guide and hardware
Fitment guide and all mounting hardware.
Installation at a glance
No drilling or modification required; the fitting guide calls for a friend to help place and secure the assembled side profiles.
The 6 mounting feet secure to the van’s existing factory roof mounting points. Seat the inner foot brackets straight against the factory fixtures, and fit rubber trim to both sides of each foot.
Assemble the side profiles, wind deflector and slats as shown in the matching guide, then tighten all fasteners and fit the nut caps. The slat Z brackets may be inverted for a lower position.
Tools shown in the fitting guide
- 4mm and 5mm hex tools
- 13mm tool
Assembly details from the fitting guide
- Initially leave the foot assemblies loose enough to slide freely in the side profiles.
- Join the side profiles and tighten the joiner fasteners to 16Nm / 11.8 ft lbs.
- With a friend, fit the side profiles over the inner foot brackets and secure the feet to the roof; the guide specifies 15Nm / 11.1 ft lbs.
- Keep the Schnorr washers above the T-slot channel when fitting the wind deflector; center the deflector and leave a 10mm gap between its left-hand and right-hand sections.
- The guide gives 20Nm / 14.75 ft lbs for tightening the wind deflector and slat fasteners.
- Slide the slats into the side profiles at 404mm increments or your chosen spacing; follow the roof A/C spacing condition above when an A/C is fitted.
Lead Time
This product
The maker’s product page advertises “Free shipping (to the lower 48 states)”; Dometic’s general shipping policy says oversized and bulky items may carry additional charges.
Warranty
This product
The maker’s product page displays “3 Year Warranty,” while its Description states that all Front Runner racks have a limited lifetime warranty.
Returns
Eligible unused Front Runner purchases through Dometic require approval and original packaging; see the published return windows, cancellation steps and shipping deductions.
Read Front Runner returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon