
Front Runner
Front Runner Mercedes-Benz Sprinter (L2H1/144" MWB/Standard Roof) (2007-Current) Slimpro Roof Rack Kit
Indexed listing. WNDR Built doesn't sell this product; the button opens dometic.com.
A roof platform with adjustable slats
This Slimpro roof rack gives a Mercedes-Benz Sprinter a platform for carrying travel gear or equipment such as ladders and pipes. Its narrow slats slide into side profiles and can be repositioned, allowing the rack layout to accommodate roof-mounted equipment such as air conditioning units, skylights and vents.
Front Runner describes the rack as low profile. The slats can be adjusted after assembly, and additional slats are sold separately when a different layout calls for them. The platform also provides mounting space for Front Runner accessories.
Aluminium and steel construction
Black epoxy powder-coated T6 aluminium and high strength steel.
Two-piece wind deflector
The wind deflector assembles from left- and right-hand sections.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Front Runner
- Fits Mercedes-Benz Sprinter L2H1 / 144" MWB · 2007-Current · Standard roof
- Vehicle length: 5923mm / 233.2".
Choose the slat-bracket position
The product page lists two positions for the included slat brackets.
Standard position
- 127mm (5") height.
Inverted position
- 85mm (3.4") height for a lower profile.
Vehicle roof-load limit
Front Runner instructs you to use your vehicle manufacturer’s recommended roof rating and not load beyond the vehicle manufacturer’s stated capacity.
Roof-plug removal
For the factory-hole installation, remove only the plugs indicated in the guide. Soften the plugs and adhesive with a heat gun, taking care not to overheat, before using a panel tool.
Roof air conditioner
If a roof A/C is fitted, the fitting guide specifies slat spacing around it at 202mm increments on shorter lengths and 404mm on longer lengths; slats can be positioned in front of and behind the A/C unit.
California warning
The maker’s product page warns: Cancer or reproductive harm — www.P65Warnings.ca.gov.
Roof attachment
12 mounting feet secure into the van’s existing factory mounting points.
OEM roof tracks
For a vehicle with OEM tracks, the fitting guide directs you to its separate OEM-track procedure: slide four M8 x 20 T-bolts into each track and attach the pre-assembled side profiles with the specified washers and nuts. A helper is needed.
Accessory compatibility
Compatible with most Front Runner accessories.
Installer experience
Front Runner recommends a professional installer or other qualified personnel if you do not understand all instructions and cautions, or if you have no mechanical experience and are not thoroughly familiar with the installation procedures.
Attachment checks
Front Runner requires checking attachments before use and periodically inspecting the rack for adjustment, wear and damage.
Specs, parts & installation
Frame & construction
| Materials | Black epoxy powder - coated T6 aluminium; high strength steel |
|---|---|
| Load-carrying area | 3176mm (125") L x 1528mm (60.2") |
| Approximate installed weight | 32.72kg (72.14lbs) |
What’s in the box
Side profiles & joiners
Four 1560mm side profiles. One van rack joiner kit, containing two joiner bars, two joiner plates and eight M6 x 16 button head bolts.
Slats & brackets
8 narrow slats, 16 slat end caps and 16 slat Z brackets, with slat assembly hardware.
Feet & spacers
12 Sprinter feet and 12 plastic spacers, with foot mounting hardware.
Wind deflector & end caps
One van rack wind deflector assembly, comprising left- and right-hand sections and hardware; four side-profile end caps.
OEM-track mounting parts
The product page lists three Sprinter Slimpro van-track T-bolt kits; the fitting guide’s box list names three track stud plates.
Hardware & guide
The product page includes all mounting hardware and a fitment guide.
Installation at a glance
No drilling or modification is required, according to the product page.
Assemble the side profiles and feet, remove the indicated roof plugs and apply sealant around all mounting holes before securing the feet at the factory holes.
Assemble and secure the wind deflector and slats following the fitting guide. A helper is listed among the installation requirements.
For OEM tracks, use the fitting guide’s separate OEM-track procedure instead of the roof-plug procedure.
Assembly sequence from the fitting guide
- Gather the assembly instructions for all rack components before beginning.
- Loosely assemble the feet so they can still slide in the side profiles, then join the side profiles.
- For factory holes, apply sealant around all mounting holes, align the feet and secure them using the specified spacers and fasteners.
- Assemble the wind deflector; leave a 10mm gap between its left- and right-hand sections.
- Assemble the slat Z brackets and slat end caps, then slide the slats into the side profiles. The guide permits 404mm increments or chosen spacing, with its separate spacing instructions applying around a roof A/C.
- Fully tighten the fasteners and cover the hex bolts and Nyloc nuts with nut caps as shown in the guide.
Tools and supplies listed in the fitting guide
- 4mm and 5mm tools, 13mm tool, panel tool and sealant, as listed in the fitting guide.
- Heat gun for the roof-plug procedure; avoid overheating the plugs and adhesive.
Lead Time
Read Front Runner lead time policy on WNDR BuiltWarranty
This product
The maker’s product page displays “3 Year Warranty”; its description states that all Front Runner racks have a limited lifetime warranty.
Returns
Eligible unused Front Runner purchases through Dometic require approval and original packaging; see the published return windows, cancellation steps and shipping deductions.
Read Front Runner returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon