
Van Compass
FRONT WINCH BUMPER, 350HD COMPATIBLE - FORD TRANSIT by VAN COMPASS
Indexed listing. WNDR Built doesn't sell this product; the button opens vancompass.com.
A chassis-mounted base for a front winch
This front winch bumper ties into the Transit chassis to support a front-mounted winch and provide two shackle recovery points. An integrated front receiver adds a separate mounting location for accessories such as a bike rack, and Van Compass also describes it as a self-recovery point.
The bumper is cut, formed and welded from steel, then finished with a baked-on zinc-rich primer and matte-black powder coat. The design accommodates front parking sensors and the brake-assist/adaptive-cruise radar through relocation hardware, with operating limitations when accessories obstruct the radar. Installation goes beyond attaching the winch mount: the guide includes metal cutting as well as trimming the plastic bumper cover.
Integrated recovery attachments
Two front shackle recovery points and a front receiver are built into the winch mount.
Optional lighting platform
Van Compass offers an add-on nerf bar that provides a platform for lights.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Van Compass
- Ford Transit · 2015-2026
- Drive types: AWD and RWD
- The product page specifically lists compatibility with 350HD Transits that have a larger intercooler.
Trail model exclusion
Not compatible with Trail model Transits that have a larger intercooler.
Metal cutting and bumper trimming
The guide requires cutting/grinding the factory bumper’s spot welds, cutting the chassis on both sides, trimming the plastic front bumper cover, and drilling the lower fascia for zip-tie attachment. Exposed metal must be smoothed and painted.
Underbody air dam and cooling shutters
The front underbody plastic air dam cannot be reinstalled. If equipped with active cooling shutters, the product page requires removing the motor from the louver assembly and remounting it out of the way; the guide also calls for removing the active grille-shutter assembly.
Receiver load and radar obstruction
Van Compass states a 300 lbs static receiver load capacity; the guide calls this a maximum vertical load of 300lbs and warns that adaptive cruise control/active brake assist will not function properly when a large item is mounted in the receiver.
Possible parking-sensor wiring extension
Front parking-sensor wiring may need extending on some models. The guide requires disconnecting the vehicle battery before cutting wires.
Front license plate
The front license plate is not retained by this setup; the guide points to separate Hawse- and Roller-fairlead plate-mount options.
Winch sizing
The product page says it is designed around Warn VR winches and refers to the Warn VR 12 for maximum size; the linked guide specifies the Warn VR EVO series and uses the Warn VR EVO 12S as its maximum-size reference. Other winches may fit within the maker’s stated size limits.
Radar relocation
For equipped vans, relocate the brake-assist/adaptive-cruise radar as directed in the guide. Model year 2026 uses the guide’s 2026+ relocation bracket; keep the radar on its OEM bracket for that procedure.
Companion equipment
The Van Compass intercooler skid plate must be the model designed specifically for this winch mount; the guide excludes its other intercooler skid-plate model and the Van Compass Transit front tow point.
Specs, parts & installation
Bumper construction
| Material | High strength 3/16" steel |
|---|---|
| Finish | Dual-stage powder coating: baked-on zinc-rich primer and matte black final finish |
What’s in the box
Winch mount and hardware
Front winch mount and mounting hardware. The guide also lists replacement fender clips, plastic hole plugs and radar-sensor relocation brackets, including the 2026+ bracket.
Parking-sensor hardware
The guide lists additional mounting straps, screws and nuts if equipped with parking sensors.
Installation at a glance
The product page recommends 4 Hours of shop labor; the guide estimates 4-6 hours plus an additional 2 hours for winch wiring.
Installation removes the front bumper/grille assembly and factory bumper, cuts the spot welds and chassis as directed, and bolts the winch mount to the chassis using retained OEM hardware and supplied hardware. Use a floor jack or helper when fitting the mount.
Follow the winch manufacturer’s instructions for fitting the winch, relocate applicable sensors, reconnect the wiring and trim/test-fit the bumper fascia before final reassembly. Installation details vary with model year, chassis/engine configuration and winch choice.
Tools listed in the guide
- Measuring tape, combination square/ruler, torque wrench, floor jack and automotive trim-removal tools.
- Metal-cutting tools: 4-1/2” angle grinder with cutting and sanding discs, 3” pneumatic cutoff tool, and die grinder or Dremel-style tool for detailed plastic trimming.
- 8mm, 10mm, 13mm and 17mm wrench/socket sizes; T-20, T-25 and T-30 Torx bits.
Lead Time
Van Compass allocates and ships orders first come, first shipped; freight orders requiring a separate payment are held until paid in full.
Read Van Compass lead time policy on WNDR BuiltWarranty
Exterior accessories have materials-and-workmanship coverage for the original purchaser’s duration of ownership, with powder coating covered for 60 days and warranty labor and shipping excluded; the Warranty Policy requires professional installation, while the FAQ says customers can install products themselves.
Read Van Compass warranty policy on WNDR BuiltReturns
The Refund policy gives 30 days from purchase, while Shipping, Return and Cancellation Policies require return authorization within 30 days of receipt; returns must be unused/uninstalled with original packaging, carry a 20% restocking fee (potentially higher for missing parts or damaged packaging), and return shipping is the customer’s responsibility; CLOSEOUT items are non-returnable.
Read Van Compass returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon