
Flatline Van Co.
Sprinter Van Front Bumper
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
A chassis-mounted winch cradle behind an aluminum bumper
Combine a structural winch cradle with a full-width aluminum bumper skin. Flatline Van Co. uses a steel cradle for the winch and recovery points and states that it transfers recovery forces to the chassis. The outer skin mounts to that cradle rather than serving as the winch support itself.
Provided bezels and a dedicated radar mounting position allow factory sensors to move into the bumper. A built-in wire chase routes the factory harness away from the winch area, with slots and holes for additional wiring. The bumper also provides auxiliary-light cutouts and a license-plate bracket.
Factory equipment
Flatline states the bumper works with OEM fog lights and the OEM DEF tank on diesel vans.
Coverage and optional skid plate
The full-width bumper wraps beneath the DEF tank on diesel vans. An optional skid plate adds coverage beneath the engine and oil pan.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
2019+ Sprinter 1500/2500/3500/3500XD | 144"/170"/170" EXT | Low/High Roof
Optional skid plate fit
Skid plates are separate purchases; choose the version listed for the drivetrain and model years.
2019-2022 4WD Skid Plate
- For 2019-2022 4WD vans
2023+ AWD Skid Plate
- For 2023+ AWD vans
2025+ radar-sensor condition
Vans from 2025 on use a different adaptive radar sensor and bezel. Flatline’s service bulletin says a bumper whose center bracket lacks a notch must be modified (cut a notch, about 45 minutes) before the 2025+ sensor cover fits. Confirm the notch with Flatline for your van.
Cutting and drilling required
Installation requires cutting the factory plastic bumper cover along lines traced from included templates, and trimming the front fender liners. Flatline says this modifies factory parts at the installer’s own risk. The fender liners also require drilling with a 7/32” bit to attach the supplied brackets.
Front hitch adapter retrofit
The retrofit guide for adding the front hitch adapter to a bumper that already has the skid plate calls for cutting hitch clearance in the skid plate, about 45 minutes. When installing the adapter with a winch, the retrofit guide requires the same mounting holes and the hardware supplied with the front hitch adapter.
Recovery only, not flat towing
Flatline states the D-ring mounts are for recovery only and that its products are not intended for flat towing.
Accessories sold separately
Winch, fairlead, skid plate, bull bar, front hitch adapter and auxiliary light pods are optional purchases and are not included with the base bumper.
Winch wiring clearance
When a winch is fitted, the guide requires keeping the radar sensor wiring away from the winch rope and tying it to the side.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Winch
The cradle fits winches up to 24.25 in L x 7.15 in D x 10.52 in H with a 10 x 4.5 in bolt pattern. Flatline names the Warn VR Evo 12-S, Zeon 12-S Platinum and DV8 Xtract 12,000 lb winches. No winch is included.
Tires and lights
Flatline states compatibility with oversized tires up to 285/75 R17. The two light-pod cutouts fit lights up to 3.29 in W x 3.29 in H x 2.83 in D; the bull bar fits lights up to 6 in in diameter. Without a winch, four Squadron 2.0 Sport pods can fit in its place. The optional bull bar provides 22 inches of lighting mounting width.
Installer requirement
Flatline recommends professional installation generally. If you have no mechanical experience and are not thoroughly familiar with the installation procedures, a professional installer or other qualified person must install the product.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Specs, parts & installation
Bumper construction
| Bumper skin | 3 mm aluminum |
|---|---|
| Winch cradle | 6 mm steel |
| Finish | Black textured UV-rated exterior-grade powder coat |
| Recovery points | 3/4 in D-rings with 7/8 in pins |
Optional components
| Skid plate (optional) | 5 mm aluminum |
|---|---|
| Bull bar (optional) | 1.75 in diameter aluminum |
Installation time
| Time | 5–6 hours per the installation guide |
|---|
What’s in the box
Bumper & cradle
Center weldment, winch cradle and driver and passenger side wings.
Brackets & templates
Cut templates, license plate bracket and center light brackets.
Sensor parts
Park sensor bezels and a 2025+ radar sensor cover kit.
Hardware & trim
Fender-liner brackets, trim gaskets, hardware and cable ties.
Installation at a glance
Flatline’s guide lists 5–6 hours with extra help suggested.
Installation cuts the factory bumper cover and fender liners, transfers factory sensors and wiring, and drills the fender liners for their brackets. Flatline advises waiting to install the bumper until any winch or lights are ready.
Installation sequence
- Flatline’s guide lists 5–6 hours with extra help suggested
- Disconnect the battery, align and trace the cut-line templates on the factory bumper cover, then remove the cover, the factory camera, adaptive radar sensor, center support and splash guard, and the fog-light and ambient-air-sensor connections
- Install the winch cradle on the frame with factory hardware, then move the park-sensor harness to the new bezels and bumper
- Cut the factory cover along the traced lines and trim the fender liners
- Bolt the assembled bumper to the cradle with a second person, attach the fender-liner brackets (drilling 7/32 in), and fit the radar sensor using the 2019-2024 or 2025+ instructions
- Reconnect the fog lights, camera, ambient-air sensor and park sensors and add trim gaskets
- Flatline advises waiting to install the bumper until any winch or lights are ready.
Lead Time
Flatline Van Co. says in-stock items ship within 1–2 business days from its Arizona warehouse. Items sent by LTL freight typically take 7–21 business days to arrive. Its FAQ says shipping is free to the lower 48; its Shipping policy lists flat-rate shipping and possible free economy shipping with longer lead times.
This product
Flatline’s product-page summary configuration lists a 6-week lead time for its Amber and Clear Baja Designs Squadron Sport LED Light Pods add-ons.
Warranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns are accepted within 30 days of receipt with a pre-authorized RMA number, for unused items in resalable condition and original packaging. A 20% restocking fee applies, and the customer pays return shipping unless the return is due to Flatline’s error; LTL freight returns must be coordinated with Flatline. Clearance, garage-sale and final-sale items are not returnable, and custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon