
Aluminess
Front Bumper - 2020+ Ford Transit
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
An aluminum bumper with a frame-mounted winch cradle
This full front winch bumper replaces the Transit’s factory bumper assembly with an aluminum outer bumper and a frame-mounted steel winch cradle. The cradle attaches to upper and lower mounting points on the frame, and the aluminum bumper bolts to it.
Aluminess offers a bull-bar configuration and a version with both a bull bar and outer brush guards. The outer bumper uses 6061 and 5052 aluminum with a textured black powder coat. Square light openings provide locations for auxiliary lights, and Aluminess lists tow hooks as part of the bumper.
An included sensor bracket provides a mounting position for the factory front radar, while the installation reuses the van’s air temperature sensor.
Accessory mounting
Aluminess lists support for off-road lights, shackles and D-rings.
Factory electronics
The bumper provides mounting positions for the factory radar and parking sensors; sensor-kit requirements are listed in Fitment.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
2020+ Ford Transit (Transit-150, -250, -350 and -350 HD), as Aluminess lists it.
Choose the guard configuration
Aluminess offers two configurations.
With Bull Bar
- Bull bar
With Bull Bar and Brush Guards
- Bull bar and outer brush guards
Not compatible
Not compatible with vans with the motorhome prep package or the optional HD Trailer Tow Package; Aluminess says their upgraded coolers interfere with the winch tray and mounting brackets, and its installation sheet adds that the large intercooler on motorhome-prep vans sits behind the factory steel bumper.
Transit Trail
Due to differences in factory components, this bumper does not fit the Ford Transit Trail.
Forklift mount and front receiver
The forklift mount is not compatible with this bumper. Aluminess says a front hitch receiver requires its Front Receiver Hitch Option – Universal.
Factory modifications
The installation sheet has the factory steel bumper removed by drilling out or cutting/grinding four spot welds, the factory front radar bracket cut with a cut-off wheel, the radiator air deflectors cut, the front license plate holder bolts removed or its rivets drilled out (if applicable), and the fender flares measured and cut after installation. Some Transit models have a louver system that must be disconnected and removed.
Hitch receiver
A custom hitch receiver option is sold separately.
Sensors and camera
Aluminess states the bumper stays fully compatible with the front camera, parking sensors and collision assist; the parking sensor kit is sold separately. The installation sheet installs the parking sensors with Aluminess’s Parking Sensor Upgrade Kit, which comes with its own instructions.
Winch
A winch is not included. Aluminess says the bumper works with most leading winch brands, though solenoid relocation may occasionally be required because winch makers change their designs.
Aftermarket vehicle conversions
Aluminess states all its products are designed to fit factory manufactured vehicles and that some aftermarket vehicle conversions are incompatible with Aluminess products.
Use and legal compliance
Aluminess states its products are designed for off-road vehicle use and may exceed the vehicle’s factory-designed capabilities. It does not guarantee compliance with local vehicle laws; purchasers must establish suitability and legal compliance before use.
Specs, parts & installation
Construction
| Material | 6061 and 5052 aluminum with a steel winch cradle (Aluminess) |
|---|---|
| Finish | Textured black powder coat (Aluminess) |
| Full brush guard configuration | 2″ (2.375” OD) Center Guard and 1.5″ (1.9” OD) outer guards |
| Light openings | Square (Aluminess) |
Shipping dimensions
| Height | 50 IN. |
|---|---|
| Width | 87 IN. |
| Depth | 48 IN. |
| Weight | 225 LBS. |
Installation torque
| Frame attachment | The installation sheet has the 1/2-13 bolts tightened to 80 ft-lbs and the 3/8-16 bolts to 20 ft-lbs |
|---|
What’s in the box
Bumper, plate and brackets
Aluminum front bumper in the selected configuration; Winch mounting plate; Front sensor bracket; Outer support brackets (driver’s and passenger’s side)
Hardware and lubricant
Hardware per the installation sheet: 1/2-13 × 1-1/2 in grade 8 bolts (18) with 1/2 in washers (26), split washers (8) and nylon-locking nuts (10); 3/8-16 × 1-1/4 in stainless bolts (8) with washers (16) and nylon-locking nuts (8); 1/4-20 × 1 in button head bolts (4) with washers (8) and nylon-locking nuts (4); anti-seize packet
Tow hooks
Tow hooks (per the product page; the installation sheet’s parts list does not itemize them)
Installation at a glance
Aluminess’s installation sheet requires two or more people and appropriate PPE. The steps: remove the grille hardware, headlights, fender flare clips and inner wheel well bolts; drill out or unbolt the front license plate holder; unplug and remove the stock plastic bumper and grille; remove the sensors, the radiator air deflectors (which are cut), any louver system, the eight bolts of the steel bumper, the four spot welds, the lower scuff guard and the factory adaptive cruise radar bracket (cut with a cut-off wheel), and touch up exposed metal. Install the factory radar on the Aluminess front sensor bracket, seat it in the bumper, bolt the winch plate to the frame (1/2-13 at the top four holes, 3/8-16 at the bottom four, 80 and 20 ft-lbs), zip-tie the temperature sensor to the winch plate, fit the outer support brackets, bolt the bumper to the plate, attach the wheel well liners with 1/4-20 bolts, then measure and cut the fender flares and reinstall them. Check that all sensors work and re-check hardware after 100 miles. Aluminess says to apply anti-seize to stainless (not grade 8) bolts. Tools listed: standard and metric wrench and socket sets, flat head screwdriver, cut-off wheel, prybar, hammer and safety glasses. Tools are not included.
Lead Time
This product
Aluminess’s FAQ says its bumpers are typically made to order and on average take 4-6 weeks for manufacturing; its shipping page says bumpers and roof racks do not qualify for free shipping and ship LTL freight.
Warranty
This product
Aluminess’s warranty page states a lifetime warranty to the original retail purchaser, provided the product is installed according to the official Aluminess installation instructions.
Returns
This product
Aluminess’s refund policy says products that are not defective can be returned within 15 days of receiving the product, and shipping charges are the customer’s responsibility.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon