
Front Runner
Front Runner Ford Transit (L4H3/148" WB/High Roof) (2013-Current) Slimpro Roof Rack Kit
Indexed listing. WNDR Built doesn't sell this product; the button opens dometic.com.
A roof platform with adjustable slats
This Slimpro roof rack gives a Ford Transit a platform for carrying travel gear or equipment such as ladders and pipes. Its narrow slats slide into side profiles and can be repositioned, allowing the rack layout to accommodate roof-mounted equipment such as air conditioning units, skylights and vents.
Front Runner describes the rack as low profile. The slats can be adjusted after assembly, and additional slats are sold separately when a different layout calls for them. The platform also provides mounting space for Front Runner accessories.
Aluminium and steel construction
Black epoxy powder-coated T6 aluminium and high strength steel.
Accessory fastening
The slat T slots and side profiles accept standard M8 hex bolts at the top and bottom.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Front Runner
- Ford Transit L4H3 / 148" WB · 2013-Current · High roof
- Vehicle length: 6704mm / 263.9".
Vehicle roof-load limit
Front Runner instructs you to use your vehicle manufacturer’s recommended roof rating and not load beyond the vehicle manufacturer’s stated capacity.
Bracket orientation
The product page states that the Z brackets cannot be inverted.
Roof air conditioner
If a roof A/C is fitted, the fitting guide specifies slat spacing around it at 202mm increments on shorter lengths and 404mm on longer lengths; slats can be positioned in front of and behind the A/C unit.
California warning
The maker’s product page warns: Cancer or reproductive harm — www.P65Warnings.ca.gov.
Roof attachment
8 mounting feet secure into the van’s existing factory mounting points.
Accessory compatibility
Compatible with most Front Runner accessories.
Installer experience
Front Runner recommends a professional installer or other qualified personnel if you do not understand all instructions and cautions, or if you have no mechanical experience and are not thoroughly familiar with the installation procedures.
Attachment checks
Front Runner requires checking attachments before use and periodically inspecting the rack for adjustment, wear and damage.
Specs, parts & installation
Frame & construction
| Materials | Black epoxy powder - coated T6 aluminium; high strength steel |
|---|---|
| Load-carrying area | 3580mm (141") x 1470mm (57.9") |
| Assembled rack kit dimensions | 3580mm (141") L x 1470mm (57.9") W x 123mm (4.8") H |
| Approximate installed weight | 43.45kg (95.79lbs) |
Installed-height reference
| Roof ditch to slat | The product page states 125mm from the bottom of the roof ditch to the top of the rack slat. |
|---|
What’s in the box
Side profiles & joiners
Four 1762mm side profiles. One van rack joiner kit, containing two joiner bars, two joiner plates and eight M6 x 16 button head bolts.
Slats & brackets
10 narrow slats, 20 slat end caps and 20 slat Z brackets, with slat assembly hardware.
Feet & spacers
8 Ford Transit feet and 8 spacers, with foot mounting hardware.
Wind deflector & end caps
One van rack wind deflector assembly, comprising left- and right-hand sections and hardware; four side-profile end caps.
Hardware & guide
The product page includes all mounting hardware and a fitment guide.
Installation at a glance
No drilling or modification is required, according to the product page.
Assemble the side profiles and feet, remove the indicated roof plugs and apply sealant around all mounting holes before securing the feet at the factory holes.
Assemble and secure the wind deflector and slats following the fitting guide. A helper is listed among the installation requirements.
Assembly sequence from the fitting guide
- Gather the assembly instructions for all rack components before beginning.
- Loosely assemble the feet so they can still slide in the side profiles, then join the side profiles.
- For factory holes, apply sealant around all mounting holes, align the feet and secure them using the specified spacers and fasteners.
- Assemble the wind deflector; leave a 10mm gap between its left- and right-hand sections.
- Assemble the slat Z brackets and slat end caps, then slide the slats into the side profiles. The guide permits 404mm increments or chosen spacing, with its separate spacing instructions applying around a roof A/C.
- Fully tighten the fasteners and cover the hex bolts and Nyloc nuts with nut caps as shown in the guide.
Tools and supplies listed in the fitting guide
- 4mm and 5mm tools, 13mm tool, panel tool and sealant, as listed in the fitting guide.
Lead Time
This product
The maker’s product page advertises free shipping to the lower 48 states.
Warranty
This product
The maker’s product page displays “3 Year Warranty”; its description states that all Front Runner racks have a limited lifetime warranty.
Returns
Eligible unused Front Runner purchases through Dometic require approval and original packaging; see the published return windows, cancellation steps and shipping deductions.
Read Front Runner returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon