
Front Runner
Front Runner Ford Transit (L2H3/130" WB/High Roof) (2013-Current) Slimpro Roof Rack Kit
Indexed listing. WNDR Built doesn't sell this product; the button opens dometic.com.
A slatted roof platform with adjustable spacing
This Front Runner Slimpro rack provides a roof-mounted platform for carrying gear, ladders or pipes. Its narrow slats sit between side profiles, with an adjustable layout that lets the platform work around roof-mounted equipment rather than requiring every slat to stay in a fixed position.
The rack uses vehicle-specific mounting feet at the van’s factory roof mounting points. A wind deflector forms part of the assembly, and the slats and side profiles have T-slots for attaching accessories. Front Runner lists compatibility with most of its accessories, so the platform can be configured for different carrying arrangements.
Adjustable slats
Slat spacing can be changed after assembly, and additional narrow slats are sold separately.
Accessory attachment
The slat T-slots and side profiles accept standard M8 hex bolts on the top and bottom.
Coated construction
Black epoxy powder-coated T6 aluminium and high strength steel form the rack kit.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Front Runner
- Ford Transit L2/H3 · 130" wheelbase · medium roof, as labeled in the fitting guide.
- 2013–Current; vehicle length 5531mm / 217.8", as listed on the product page.
Bracket orientation
The Z brackets cannot be inverted.
Vehicle roof rating
Follow the vehicle manufacturer’s recommended roof rating; Front Runner warns that its rack kits can have a higher load rating than the vehicles they mount to.
Installer experience
If you do not understand the instructions and cautions, or have no mechanical experience and are not thoroughly familiar with the installation procedures, the guide says to use a professional installer or other qualified personnel.
Attachment checks
Check attachments before use and periodically inspect the rack for adjustment, wear and damage.
Mounting points
Six mounting feet attach to the van’s existing factory roof mounting points.
Roof A/C layout
If roof A/C is fitted, the guide specifies slat spacing around it at 202mm increments on shorter lengths and 404mm on longer lengths; slats can sit in front of and behind the A/C unit.
Maximum driving speed
Front Runner’s product page specifies a maximum driving speed of 130 km/h / 80 mph when equipped with a Front Runner roof rack or load-bar kit.
Specs, parts & installation
Construction
| Materials | Black epoxy powder-coated T6 aluminium; high strength steel |
|---|---|
| Approximate installed weight | 26.59kg (58.62lbs) |
Dimensions
| Load-carrying area | 2368mm (93") x 1470mm (57.9") |
|---|---|
| Assembled rack kit | 2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H |
| Roof-ditch height | 125mm from the bottom of the roof ditch to the top of the slat |
What’s in the box
Rack platform
Four 1156mm side profiles; six narrow slat assemblies with end caps, Z brackets and fastening hardware; one van rack joiner kit; four side-profile end caps.
Roof mounting
Six Ford Transit feet, six spacers and mounting hardware.
Wind deflector and instructions
One wind deflector assembly with left- and right-hand sections and fastening hardware; fitment guide.
Installation at a glance
Mounts to the factory roof points without drilling or vehicle modification, according to Front Runner’s product page.
Remove the roof plugs with a panel tool and apply sealant around every roof mounting hole. Assemble the side profiles and secure the feet using the guide’s 10mm plastic spacers and supplied mounting fasteners.
Follow the linked fitting guide for component orientation and tightening torques.
Tools and supplies listed in the guide
- 4mm and 5mm tools, 13mm wrench, panel tool and sealant.
- The guide also lists a friend to assist.
Slat and wind-deflector assembly
- Assemble the wind deflector and leave a 10mm gap between its left- and right-hand sections.
- Fit the slat Z brackets and end caps, then slide the assembled slats into the side profiles.
- For the general layout, the guide gives 404mm increments or your chosen spacing.
- Fully tighten the fasteners and cover hex bolts and Nyloc nuts with nut caps.
Source notes
- Front Runner’s product-page title and description specify high roof; fitting guide labels this kit “FORD TRANSIT L2/H3 130" WB MED ROOF VAN RACK KIT.” This listing follows the guide’s medium-roof label.
- The product-page warranty badge states “3 Year Warranty”; its description states all Front Runner racks have a limited lifetime warranty. The product callout uses the shorter stated term.
- Dometic’s Warranty page advertises a 30-day return policy; Shipping & Returns says the return window is stated on the order confirmation.
Lead Time
Read Front Runner lead time policy on WNDR BuiltWarranty
This product
The product-page badge states a 3 Year Warranty.
Returns
Eligible unused Front Runner purchases through Dometic require approval and original packaging; see the published return windows, cancellation steps and shipping deductions.
Read Front Runner returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon