
Flatline Van Co.
Transit Van Safari Roof Rack
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
A roof platform with removable decking
The Transit Safari Rack provides rooftop space for carrying gear or spending time on the roof. The Safari Rack is a roof platform for the Ford Transit made from 1.5 in round aluminum tube with laser-cut aluminum decking panels that Flatline Van Co. lists as 3/16 in thick. The panels are removable and placed where a roof fan or air conditioner would sit, so the deck does not need extra cut-outs around them, and every panel has L-track-compatible mounting points for securing gear.
Each size is offered with a Basket Style front or a Drop Front. The Basket Style has a classic basket front. The Drop Front adds a drop-down section that Flatline describes as a place to mount lighting and as extra deck space; its guide suggests mounting lights to that section before installing it on the rack.
Factory-point attachment
The rack bolts to the van roof through foot brackets that go onto the factory mounting points, with side rails, front and rear baskets, crossbars and floor sections assembled on the roof.
Wire routing & accessory slots
An integrated wire chase channel runs around the rack’s perimeter, and the 8020 crossbars have built-in hardware slots for mounting accessories.
Awning attachment
Awning brackets for the Fiamma F45S and other wall-mount style awnings are included.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2015+ Transit 150/250/350 | 148"/148" EXT | Mid/High Roof
- 2023-2024 Transit Trail | 148"/148" EXT | Mid/High Roof
Choose your rack front
Each van size/height option is available in both styles, for eight combinations.
Drop Front
- Drop-down front for mounting lighting and increased deck space.
Basket Style
- Classic basket-style front.
Mounting-hole clearance modification
The guides have you remove the mounting hole caps on the roof (a heat gun on low loosens the adhesive), clean the surface and bolt foot brackets to the factory threaded slots with M8 bolts, thread locker and bonded sealing washers. The guide requires checking bolt clearance to the factory threaded slots and describes carefully enlarging the mounting holes if access is obstructed; follow the illustrated instructions for the exact location. A bead of exterior waterproof sealant goes around each landing pad.
Drop Front and antenna clearance
Installing the Drop Front requires maneuvering it around the van’s antenna; the guide suggests a second person.
Size choice
Choose the option that matches the van: 2015+ 148 in High Roof, 2015+ 148 in High Roof Ext., 2015-2025 148 in Mid Roof, or 2026+ 148 in Mid Roof. Each size is offered as Drop Front or Basket Style, giving eight combinations.
Mid roof
The mid roof guides add support foot brackets and driver- and passenger-side support brackets that are adjusted until tight against the van roof.
Fans and A/C
Decking panels at the fan and A/C locations are removable. The guide labels a fan cover section as removable for a MaxxAir fan, and the High Roof Ext. guide says its rear floor section 5 is interchangeable with any fan panel location to suit different fan locations.
Awning
Three F45 awning brackets for the Fiamma F45S and other wall-mount style awnings are included, and the guide gives their positions by measurement from a reference point. The Add Awning selector offers the Fiamma F45 300 for Transit 148 and the F45 350 for Transit 148 Ext. The awning is not included.
Side ladder
A side ladder bracket is included for an optional Side Ladder, which is sold separately; the guide shows multiple slot positions for it.
Roof top tents
Flatline states the rack is compatible with most roof top tents.
Installer requirement
Flatline’s installation guide says that anyone who has no mechanical experience and is not thoroughly familiar with the installation procedures must have the product installed by a professional installer or other qualified person. Flatline also states it always recommends a professional install for any aftermarket accessory. Flatline’s FAQ also says to contact a Certified Installer if you are not comfortable installing the Safari Rack after viewing the installation guide.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Specs, parts & installation
Rack construction
| Tube | 1.5 in diameter aluminum round tube on all sizes |
|---|---|
| Decking panels | Laser-cut aluminum, 3/16 in thick, removable, with L-track-compatible mounting points |
| Crossbars | 8020 crossbars with built-in hardware slots |
| Wire management | Integrated wire chase channel around the rack perimeter |
Maker warning
| Maker warning | Flatline’s product warning: This product can expose you to chemicals including Carbon Black & Titanium Dioxide which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. |
|---|
What’s in the box
Frame & crossbars
Side rails, front and rear baskets (Drop Front option adds a drop-down weldment and drop front floor section), crossbars and bayonets
Feet & decking
Foot brackets (mid roof adds mid roof foot brackets and support brackets), floor sections including fan panels and fan covers
Accessory brackets
Three F45 awning brackets and a side ladder bracket
Mounting hardware
Fasteners, clip nuts, T-nuts and bonded sealing washers
Installation at a glance
Flatline’s guides list 3–4 hours and suggest additional help for a few steps.
Assemble the rack on the factory roof mounting points with basic hand tools; no forklift is required.
Installation sequence from Flatline’s guide
- Remove the roof mounting hole caps (heat gun on low, chisel or plastic pry tool), clean the surface with goo-gone and denatured alcohol, dry-fit the foot brackets and check bolt clearance to the factory threaded slots. The illustrated guides describe carefully enlarging the mounting holes if access is obstructed. Bolt on the foot brackets with M8 bolts, thread locker and bonded sealing washers and seal around each landing pad. Assemble the side rails with bayonets and clamp the seams while tightening, lift the side rail assembly onto the roof with assistance and loosely bolt it to the foot brackets, attach the front and rear baskets, then (Drop Front only) attach the drop front. Optionally install the awning brackets and side ladder bracket, attach the crossbars with thread locker and measure that they are square, install clip nuts and T-nuts, lay out the floor panels and tighten everything. Mid roof guides add support bracket assemblies adjusted until tight against the roof.
- For the optional side ladder, the guide recommends installing the side ladder bracket and hardware now even if the ladder will be purchased or attached later.
Tools and supplies
- measuring tape, Qwick clamps, 3/8 in, 7/16 in, 9/16 in and 13 mm wrenches or sockets, 5/32 in Allen wrench (7/32 in also on mid roof guides), chisel, die grinder or metal file, caulking gun, and exterior sealant. Tools are not included.
Lead Time
Flatline Van Co.’s FAQ says in-stock items ship within 1-2 business days and shipping is free to the lower 48; its Shipping policy lists flat-rate and economy options, with economy potentially free for longer lead times and typical LTL delivery of 7-21 business days.
This product
Flatline’s product page says in-stock Transit racks ship free within 1-2 business days.
Warranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns require a pre-authorized RMA within thirty (30) days of receipt, unused items in resalable condition and original packaging; a 20% restocking fee applies and the customer pays return shipping unless Flatline made an error. LTL returns require coordination; clearance, garage-sale and final-sale items cannot be returned, and identified custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon