
Flatline Van Co.
Transit Van Low Pro Roof Rack | 130" Mid Roof
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Movable roof crossbars with a choice of front fairing
Create a roof platform with movable crossbars and a front wind fairing. Flatline Van Co. uses 10-series aluminum extrusions with drop-in hardware slots, allowing the crossbars to be repositioned for equipment mounting.
Stainless landing pads support the side rails at the factory roof mounting points. The rack is offered with a plain fairing or a fairing with a light-bar cutout, so the front panel can match the intended lighting arrangement. Exact option and accessory conditions are listed in Fitment.
Dual-flanged landing pads
Flatline says the formed stainless steel landing pads distribute the load to the van’s strong points.
Accessory mounting
The rack can carry solar panels, a rooftop tent and other accessories mounted on its crossbars.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
2015-2023 Transit 150 | 130" | Mid Roof
Choose the fairing
Both fairing styles are offered for this rack.
Normal Fairing
- Aluminum wind fairing
Fairing with 50" Light Bar Cutout
- Pre-modified to accommodate most 50” LED light bars or off-road lights
- Includes a light bar tray
- Flatline recommends the Baja Designs ONX6 50" Arc LED Light Bar, but does not require it
- Light bar sold separately
Roof-hole clearance and sealing
The guide removes six roof mounting-hole caps, cleans the mounting surface and dry-fits the landing pads to check bolt clearance to the factory threaded slots. If access is obstructed, the guide describes carefully enlarging the mounting holes with a die grinder; follow its illustrated instructions for the exact location. The landing pads require exterior waterproof sealant around each pad; the guides list sealant among tools and supplies not included.
California Proposition 65
Flatline warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), which California identifies as causing cancer and birth defects or other reproductive harm.
Companion parts
The Transit Mid Roof Side Ladder bolts directly to this rack and is sold separately.
Awning
The product page states that a Fiamma F45S 260 bolts up with no modifications required. The light-bar-fairing guide has an optional Fiamma F45S (or similar) awning step that uses included awning spacer plates and pre-placed mounting holes. The normal-fairing guide has no awning step. The awning is not included.
Installer requirement
Flatline recommends professional installation generally. If you have no mechanical experience and are not thoroughly familiar with the installation procedures, a professional installer or other qualified person must install the product.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Specs, parts & installation
Frame & mounting
| Rack weight | Flatline states a total rack weight of 63 pounds. |
|---|---|
| Side rails | 3/16” aluminum |
| Landing pads | Formed 12GA 304L stainless steel with dual flanges |
| Crossbars | Six 10-series, 80/20-compatible anodized aluminum extrusions |
| Fairing | Aluminum |
| Hardware | Stainless steel |
Installation time
| Time | 1–2 hours per the installation guides |
|---|
What’s in the box
Rails, landing pads & crossbars
Four side rails (front and rear, driver and passenger), two rail connecting plates, six landing pads and six crossbars.
Normal Fairing option
Aluminum wind fairing with fairing brackets and trim gasket.
Light Bar Cutout option
Light bar fairing with light bar tray, two fairing side brackets, trim gasket and three awning spacer plates.
Hardware
Stainless steel hardware and threadlocker.
Installation at a glance
Flatline’s guides list 1–2 hours and suggest additional help for a few steps.
Mount the landing pads at the factory roof mounting points, apply exterior waterproof sealant, join the side rails and position the crossbars and fairing.
Installation sequence and tools
- Flatline’s guides list 1–2 hours
- Remove and clean the six roof hole caps, dry-fit the landing pads and check bolt clearance to the factory threaded slots
- The illustrated guide describes carefully enlarging the mounting holes if access is obstructed
- Bolt the pads on with M8 bolts, threadlocker and bonded sealing washers, and seal around each pad
- Set the side rails on the pads, join the front and rear rails with connecting plates, position the crossbars, then assemble the fairing and its brackets, lift the fairing into place with a helper and tighten it to the rails
- Adjust left-to-right and front-to-back position, including for an awning, before tightening the rail fasteners
- Tools listed include a chisel, die grinder, ratchet, 7/16 in box wrench, 13 mm socket, 5/32 and 3/16 in Allen wrenches, exterior sealant and a caulking gun.
Lead Time
Flatline Van Co. says in-stock items ship within 1–2 business days from its Arizona warehouse. Items sent by LTL freight typically take 7–21 business days to arrive. Its FAQ says shipping is free to the lower 48; its Shipping policy lists flat-rate shipping and possible free economy shipping with longer lead times.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns are accepted within 30 days of receipt with a pre-authorized RMA number, for unused items in resalable condition and original packaging. A 20% restocking fee applies, and the customer pays return shipping unless the return is due to Flatline’s error; LTL freight returns must be coordinated with Flatline. Clearance, garage-sale and final-sale items are not returnable, and custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon