
Flatline Van Co.
Transit Van Side Ladder | Mid Roof
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Side access to your Transit roof
This side ladder provides roof access for tasks such as clearing solar panels and loading rooftop storage. Its upper mount bolts to the roof rack, while a lower support bracket attaches at the van’s pinch seam.
The ladder’s upper and lower halves join with bayonet couplers. Its aluminum tube frame carries formed aluminum steps, and the double-kink shape follows the lines of the Transit van.
Rack attachment
Designed to bolt onto Mid Roof Transit Low Pro Roof Racks and Safari Racks.
Black finish
Powder coated black to match the Low Pro Roof Rack and the Safari Rack.
Exterior installation
Flatline Van Co. states you no longer need to remove the plastics to mount the side ladder.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
2015+ Transit 150/250/350 | 130"/148"/148" EXT | Mid Roof
Drilling required
The installation guide requires drilling pilot holes at all mounting holes along the pinch seam, then securing the mount plate with 1/4" self-drilling screws.
California Proposition 65
Flatline Van Co. warns that this product can expose you to lead and lead compounds, DEHP and bisphenol A (BPA), chemicals known to California to cause cancer and birth defects or other reproductive harm.
Required roof rack
Bolts onto Mid Roof Transit Low Pro Roof Racks and Safari Racks.
Mounting configuration
Use the mounting location for your van configuration shown in the Mid Roof guide; use the 130" mount plate if applicable.
Installer requirement
Flatline Van Co. recommends professional installation. If you have no mechanical experience and are not thoroughly familiar with the installation procedures, the guide requires a professional installer or other qualified person.
Before use
Check mounting points and attachments before use, and regularly inspect the ladder for wear or damage.
Specs, parts & installation
Construction
| Tubing and steps | 1.25" aluminum round tube with formed aluminum steps |
|---|---|
| Finish | Powder coated black |
| Weight | Flatline Van Co. states 16 pounds. |
What’s in the box
Ladder and supports
One ladder upper half, one ladder lower half, two bayonet couplers and one support bracket. The Mid Roof guide illustrates alternative support bracket shapes.
Mounting hardware
All hardware for mounting to the Low Pro Roof Rack and the Safari Rack is included. The guides list three 3/8-16 x 1 button-head hex-drive screws, ten 3/8 flat washers, five 3/8-16 nylon-insert locknuts, eight 1/4-20 x 0.75 flanged button-head hex-drive screws, two 3/8-16 x 1.25 button-head hex-drive screws, and 1/4 x 1 hex-head drilling screws with sealing washers.
Threadlocker
One 5ML threadlocker bottle.
Installation at a glance
Flatline Van Co. lists 1 hour and suggests additional help for a few steps.
Join the ladder halves using the bayonet couplers and threadlocker. Loosely attach the lower mount plate and roof-rack fasteners, align the ladder vertically, secure the mount plate at the pinch seam as described above, then tighten all fasteners.
Inspect the product, packaging and supplied parts before starting; contact Flatline Van Co. if anything is missing.
Tools required — not included
- 9/16” wrench or socket
- 7/16” wrench or socket
- 7/32” Allen wrench
- 5/32” Allen wrench
- Power drill
- 1/8” drill bit
Alignment and fastening
- Leave the lower support bracket loose while fitting the ladder.
- Seat the mount plate tightly against the pinch seam and position the upper mount in the roof-rack slots.
- The guide prefers a location close to the rear wheel-well fender; make sure the ladder is straight up and down before securing the mount plate.
- After securing the mount plate, tighten the fasteners along the roof rail and mounting bracket.
Source notes
- Flatline Van Co.’s Mid Roof installation guide, page 4, lists 10 of the 1/4 x 1 hex-head drilling screws with sealing washers; its All Types guide, page 4, lists 9. The disputed quantity is omitted from the included-hardware list.
Lead Time
In-stock dispatch: 1–2 business days; LTL delivery: typically 7–21 business days; preferred service uses flat rates; economy may be free with longer lead times.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
Flatline-made products have a one-year limited warranty for the original purchaser; purchaser-paid claim returns and exclusions apply; other manufacturers’ products carry only their applicable manufacturer warranties.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns within 30 days of receipt require RMA, unused original-packaged items and 20% restocking; customer-paid shipping unless Flatline error; clearance/garage-sale/final-sale excluded; identified custom/made-to-order exclusions may apply.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon