
Flatline Van Co.
Transit Van Low Pro Roof Rack | 148" High Roof Extended
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Adjustable crossbars for an extended Transit roof
The Transit Low Pro Roof Rack carries rooftop accessories on adjustable crossbars. The Low Pro is a roof rack for the Ford Transit that follows the roofline. Landing pads of formed 12-gauge 304L stainless steel with dual flanges and a central mounting point bolt to the factory roof mounting points, and Flatline Van Co. says they distribute the load to strong points on the van roof. Aluminum side rails sit on the pads and an aluminum fairing at the front deflects wind.
Seven crossbars of 10-series, 80/20-compatible anodized aluminum slide along the rails, so they can be positioned around roof fans or an air conditioner and used to bolt on accessories such as solar panels, light bars or MaxTrax through the drop-in hardware slots. Flatline says rubber footer gaskets and rubber sealing washers keep the roof watertight where the footers meet it.
Normal or light-bar fairing
An aluminum wind fairing is included; the light-bar option adds a light bar tray and mounting locations for lighting.
Side ladder attachment
Flatline says its Transit side ladder bolts directly to the rack’s side pill slots.
Decking layout
Flatline’s Universal Decking Panels are directly compatible with the crossbars and are sold separately.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2015+ Transit 150/250/350 | 148" EXT | High Roof
- 2023-2024 Transit Trail | 148" EXT | High Roof
Choose your fairing
Both fairing styles are available for the 2015-2025 and 2026+ model-year options.
Normal Fairing
- Aluminum wind fairing.
Fairing with 50" Light Bar Cutout
- For mounting a light bar or off-road lights.
- Flatline says it accommodates most 50” LED light bars.
- Flatline recommends the Baja Designs ONX6 50" Arc LED Light Bar.
Mounting-hole clearance modification
The guide has you remove the roof mounting-hole caps, clean the surface and dry-fit the landing pads to check bolt clearance to the factory threaded slots. If access is obstructed, the guide describes carefully enlarging the mounting holes with a die grinder; follow the illustrated guide for the exact location. Flatline’s FAQ describes the rack as requiring no drilling, but the guide may require this clearance modification.
Light bar not included
A light bar is not included with the light-bar fairing option.
Model year choice
Choose 2015-2025 or 2026+ to match the van. Both model-year options are offered with Normal Fairing or Fairing with 50 in Light Bar Cutout, giving four combinations.
Awning
Flatline states the Fiamma F45S 350 awning bolts on with no modifications. The Light Bar Fairing guide has an optional Fiamma F45s-or-similar step that uses pre-placed mounting holes and the included awning spacer plates; the Normal Fairing guide has no awning step. The awning is not included.
Companion parts
Flatline says its Transit side ladder bolts directly to the rack’s side pill slots; the page’s related-product selector lists the Transit Van Side Ladder | High Roof. It is sold separately. Flatline’s Universal Decking Panels are described as directly compatible with the crossbars and are sold separately.
Installer requirement
Flatline’s installation guide says that anyone who has no mechanical experience and is not thoroughly familiar with the installation procedures must have the product installed by a professional installer or other qualified person. Flatline also states it always recommends a professional install for any aftermarket accessory.
Before use
Check mounting points and attachments before use, and regularly inspect the product for wear or damage, as required by Flatline’s guides.
Fairing crossbar
The guides require reserving one crossbar for the front fairing assembly.
Specs, parts & installation
Rack construction
| Crossbars | Seven 10-series, 80/20-compatible anodized aluminum extrusions with drop-in hardware slots |
|---|---|
| Landing pads | Formed 12-gauge 304L stainless steel with dual flanges |
| Side rails and fairing | Aluminum; hardware stainless steel |
| Side rail thickness | Formed 3/16 in aluminum side rails, per Flatline’s comparison image |
Dimensions & weight
| Rack weight | 79 lb total (Flatline product details and dimensions image) |
|---|---|
| Usable rack length | 145 in (Flatline dimensions image) |
| Usable width | 57.3 in; crossbar width 58 in (Flatline dimensions image) |
| Side rail height | 5 in (Flatline dimensions image) |
Maker warning
| Maker warning | Flatline’s product warning: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
|---|
What’s in the box
Side rails
Four side rails (front and rear, driver and passenger) and two rail connecting plates
Landing pads & crossbars
Ten landing pads and seven crossbars
Fairing assembly
Aluminum wind fairing with fairing brackets and trim gasket (light bar version adds a light bar tray, fairing side brackets and awning spacer plates)
Mounting hardware
Stainless steel hardware, bonded sealing washers and thread locker
Installation at a glance
Flatline’s guides list 1–2 hours and suggest additional help for a few steps.
Mount the landing pads at the factory roof holes, seal the pads, then assemble the rails, crossbars and fairing.
Installation sequence from Flatline’s guide
- Remove the roof mounting hole caps (heat gun on low, chisel or plastic pry tool) and clean the surface with goo-gone and denatured alcohol. Dry-fit the landing pads and check bolt clearance to the factory threaded slots. The illustrated guide describes carefully enlarging the mounting holes with a die grinder if access is obstructed. Bolt the pads on with M8 bolts, thread locker and bonded sealing washers and apply a bead of exterior waterproof sealant around each pad. Set the side rails on the pads, join front and rear rails with the connecting plates, position the crossbars, and assemble the fairing with its brackets (or light bar tray) and trim gasket. With a helper, lift the fairing into place and tighten it to the rails. Adjust left-to-right and front-to-back position, including for an awning, before tightening the rail fasteners.
Tools and supplies
- chisel, die grinder or metal file, ratchet, 7/16 in box wrench and socket, 13 mm wrench or socket, 5/32 in and 3/16 in Allen wrenches, exterior sealant and a caulking gun. Tools are not included.
Lead Time
Flatline Van Co.’s FAQ says in-stock items ship within 1-2 business days and shipping is free to the lower 48; its Shipping policy lists flat-rate and economy options, with economy potentially free for longer lead times and typical LTL delivery of 7-21 business days.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
One-year limited warranty from the original purchase date for the original purchaser, covering product cost only. It excludes installation, labor and freight, and damage from racing, competition or trail use, and is void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Returns require a pre-authorized RMA within thirty (30) days of receipt, unused items in resalable condition and original packaging; a 20% restocking fee applies and the customer pays return shipping unless Flatline made an error. LTL returns require coordination; clearance, garage-sale and final-sale items cannot be returned, and identified custom or made-to-order items may also be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon