
The BugWall
Thor Tellaro Rear Bugwall Insect Screen
Indexed listing. WNDR Built doesn't sell this product; the button opens thebugwall.com.
Rear-door insect protection that rolls away
The BugWall rear-door insect screen is designed to keep insects out while the rear doors are open. No-See-Um bug netting on marine canvas. Zippers on both sides for access and roll-up; rolled flaps are secured with included buckle straps. Zipper across the top lets you remove the rolled-up screen.
Rear screen that, per the maker, does not interfere with gear hanging space next to the shower. An interior privacy flap rolls down to block the view when using the rear bathroom without going outside to close the doors.
Foam-filled lower panel
Bottom solid portion is high enough to hide the toilet of the rear bath and has foam inside for roll-up.
Toilet paper strap
Strap on the inside to hold a roll of toilet paper.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by The BugWall
Rear screen specific to the Thor Tellaro 20H and 20L models. The page also states: "Fits Thor Tellaro, Thor Sequence and Winnebago Travatos and other similar Class B RVs with rear baths built on the Ram Promaster chassis."
Trapped weather seal
If the weather seal is trapped behind something and cannot be removed, follow the linked guide’s trapped-seal video.
Roof height
The product heading reads "HIGH ROOF". No roof-height option is offered.
Door
Rear doors. Side sliding door screens for Thor Class B RVs are sold separately.
Options
None; a single default variant is offered.
Specs, parts & installation
Screen construction
| Materials | US made marine canvas with No-See-Um bug netting and USA made marine grade zippers. The BugWall states the screen is UV stable. |
|---|---|
| Made in | The BugWall states it manufactures its screens in Conway, SC. |
What’s in the box
Screen and straps
Rear-door insect screen with buckle straps for securing rolled-up flaps.
Installation supplies
Roll of double-sided tape and mounting clips, as stated in the brand-wide installation guide.
Other included item
Bugwall coozie, as stated in the brand-wide installation guide.
Installation at a glance
Mount with double-sided tape, clips and the van’s weather seal, then trim excess fabric.
Follow the updated written instructions; the older videos are a visual guide only. Follow any supplemental instructions supplied with the package as well.
For rear screens there is no guideline: align the latch holes, slots or cuts with the rear-door latches to set the height.
Before reinstalling the weather seal, pinch it back shut; seat it fully around the corners.
Mounting sequence from the maker
- Mark the weather seal and van so the seal can return to its original position; remove the seal across the top of the opening.
- Clean the flange with alcohol or wipe it with water. Apply double-sided tape across the top and around both corners, half on the front and half on the back of the flange, then remove the red cover.
- Position the screen using the tape. Wrap the fabric around the flange with enough room behind the corners for the weather seal to go back fully into place.
- Use the thick clips across the top. Install one in the center and one towards each side, then check the length before adding more: clips are difficult to remove. The guide says the weather seal and side work will lift the screen about another 1/4" or so.
- If the length is correct, install a clip about every 6-8" across the top. Add clips around the corners, including just below the corner and in the turn.
- Work down the sides, using clips that fit the metal thickness and keeping the zippers straight. The guide suggests relief cuts in the fabric at the left-edge bump-out.
- Once satisfied with the position, trim excess fabric; the guide recommends scissors rather than a razor. Pinch the weather seal shut, reinstall it at the reference marks and use a mallet to seat it fully, especially around the corners.
Lead Time
Lead times vary; contact the maker. Product banner: about 1 week to shipment for new orders; international taxes, fees, duties and tariffs are the buyer’s responsibility.
This product
The maker’s product-page banner estimates 1 week until shipment from its shop for new orders due to high demand.
Warranty
Read The BugWall warranty policy on WNDR BuiltReturns
Returns within 30 days; later returns incur a 25% fee and are not accepted after 90 days.
Read The BugWall returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon