
Aluminess
Transit Van Nerf Bars and Side Step
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
A step up along the van’s side
These Aluminess nerf bars add a step up into a Ford Transit. Van Upgrades describes their position as high enough to maintain ground clearance while providing a place to step.
Van Upgrades also says the bars offer some side protection against shopping cart incidents.
Aluminum and powder coat
The bars are made from aluminum and powder coated black.
US manufacture
Made in the USA by Aluminess.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- Ford Transit · 148" wb
- Ford Transit · 130" wb
Drilling and riv-nut tool required
The Aluminess guide requires drilling ½” holes into the vehicle body and a good-quality Riv Nut installation tool; the Riv Nuts must be installed securely.
Two-person installation
The Aluminess guide requires two people for installation.
Running-board and ladder sequence
If your van has a factory running board, remove it first. If you are also installing a ladder, the guide requires installing it before the nerf bars.
California Proposition 65
Van Upgrades’ product page warns: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
Wheelbase selection
Choose the 148" wb or 130" wb option to match your van’s wheelbase.
Specs, parts & installation
Construction
| Material | Aluminum |
|---|---|
| Finish | Powder coated black |
| Manufacture | Made in the USA by Aluminess |
What’s in the box
Riv Nuts
- 30 × ½” OD – 3/8” Thread Aluminum Riv Nuts
Bolts and washers
- 30 × 3/8” x 1.25” Stainless Hex Head Bolts
- 30 × 3/8” Stainless Washers
- 30 × 3/8” Stainless Lock Washers
Instructions
Installation instructions are included.
Installation at a glance
Aluminess requires two people, drilling and a Riv Nut installation tool.
The bars bolt to Riv Nuts installed in factory holes and additional drilled holes in the body.
The guide recommends applying anti-seize assembly lubricant to each bolt’s threads before assembly because stainless steel hardware may bind.
Tools listed by Aluminess
- Standard wrench set
- Riv Nut Installation Tool
- Drill with ½” bit
Mounting sequence in the Aluminess guide
- Remove the factory running board, if present.
- With a helper, hold the nerf bar against the body to identify factory holes that align with the brackets; existing mounting studs align if a factory running board was fitted.
- Remove the bar, install Riv Nuts in the aligned factory holes and bolt the bar in place.
- Use the brackets as guides to drill ½” body holes; each bracket takes (3) Riv Nuts through its upper part and (2) through its lower part.
- Remove the bar and install Riv Nuts in the drilled holes. Install a ladder at this stage if fitting one, before the nerf bars.
- Once all Riv Nuts are installed, bolt the bar back to the vehicle.
Lead Time
This product
Van Upgrades’ product page states 6-8 weeks depending on the production cycle, with free shipping to the lower 48.
Warranty
Van Upgrades provides no warranty; any applicable warranty is from the manufacturer or supplier.
Read Aluminess warranty policy on WNDR BuiltReturns
Van Upgrades excludes Aluminess returns; other eligible 30-day returns may incur 25% restocking; canceled orders incur 12%; accepted orders may not be cancellable.
Read Aluminess returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon