
White Top Adventures
Sprinter Rear Door Atlas Storage Rack | Passenger Side
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
A rear-door mounting platform for boards, bikes and boxes
The White Top Adventures Atlas rack turns the passenger-side rear door into an exterior mounting platform for storage boxes, bike mounts and other gear. Its mounting surface accepts MOLLE bags, accessory rails and tie-downs, so the rack can serve different cargo setups rather than carrying one fixed accessory.
The aluminum panel attaches at the upper and lower door hinges and uses a support plate and bushing at an additional through-door mounting point. White Top Adventures offers it as a standalone rack or alongside its Sprinter Rear Tire Carrier Ladder. Optional rack poles provide upright carriage for surfboards, snowboards, paddleboards and skis.
Accessory mounting surface
Mount MOLLE bags, rails and tie-downs to the panel; White Top Adventures also lists bike mounts, storage boxes and fuel storage among its uses.
Aluminum construction
The rack has a matte black powder-coat finish.
Separate rear-door components
The rack can be used on its own or alongside White Top Adventures' Sprinter Rear Tire Carrier Ladder.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
- 2019+ Mercedes Sprinter · 144" and 170" wheelbases · passenger-side rear door only.
180° hinges required
Check your hinges before ordering. The rack requires 180° rear-door hinges; install them first if your van does not have them. White Top Adventures sells the hinge upgrade separately and warns that 270° hinges can let the rack contact the van's side when fully opened.
Drilling required
The installation guide requires removal of the lower interior passenger rear-door panel and drilling through the door. Pilot the hole, follow with the M10 drill bit, and protect exposed metal with quick-drying rust-inhibiting paint.
Accessories sold separately
Poles, boxes and trays are sold separately. The storage boxes, basket, bike-rack adapter, 180° hinge and rack poles shown in the maker's add-on controls are optional purchases.
Bolt length
Do not substitute longer bolts: White Top Adventures warns they can interfere with the hinge mechanism when the door closes and damage the hinge or door. Follow the linked guide's hinge hardware instructions.
Load and door limits
White Top Adventures' product FAQ rates the Atlas rack's MOLLE panel for 200 lbs. Stay within Mercedes-Benz's maximum rear-door weight rating for your specific van; confirm the combined weight of both bikes before mounting e-bikes.
Installer requirement
White Top Adventures recommends professional installation. If you lack mechanical experience or are unfamiliar with the procedures, its guide requires a qualified professional or someone with the necessary expertise.
Before use
Inspect mounting points and attachments before use, and regularly check for wear or damage.
Specs, parts & installation
Panel and construction
| Material | Aluminum |
|---|---|
| Finish | Matte black powder coat |
| Face dimensions | 25.2" face width, 62" face height |
| Product weight | 55.3 lbs |
Loading
| MOLLE panel rating | White Top Adventures' product FAQ states 200 lbs; remain within Mercedes-Benz's maximum rear-door weight rating for your van. |
|---|
What’s in the box
Rack and mounting plates
One mounting plate (illustrated as the rack), one support plate, one bushing, one upper hinge backing plate and one lower hinge backing plate.
Mounting hardware
One M10*90 button head screw, four M10*25 button head screws, six M10 flat washers and M10 nylon lock nuts.
Installation at a glance
Hinge mounting plus a drilled through-door support point; follow the product-specific guide.
Install the hinge backing plates, position the rack and leave the fasteners loose for alignment. Secure the mounting plate, bushing and support plate through the drilled door hole with the M10*90 button head screw. Align the rack with the door/window body lines, open the door to verify that the lower hinge bracket's door stop engages the factory bump stop, then tighten the hinge fasteners.
Guide sequence
- Remove the lower interior passenger rear-door panel; White Top Adventures recommends plastic panel-removal tools and care around the factory clips.
- Use the rack to locate the support hole near the support plate's top edge, not its center. Drill and paint the exposed metal as described above.
- Use the M10*25 hinge screws, washers and nylock nuts specified in step 3.1. The guide suggests a friend holding the backing plates and door, or double-sided tape holding the backing plates with the door closed.
- Leave the hinge fasteners loose until the support mount is secured and alignment is checked.
Thread locker
- Blue Loctite on the bolt brackets is recommended, not required, by the product FAQ.
Source notes
- White Top Adventures' FAQ rates the MOLLE panel at 200 lbs and the full system with storage box at 300 lbs; its Details lists 300 lbs maximum, static and dynamic loads. The higher rating is unconfirmed for this rack alone; this listing uses the FAQ's 200 lbs panel rating.
- The V1.2 guide's package table lists one M10 nylon lock nut, while step 3.1 calls for four M10 nylock nuts at the hinges; the disputed supplied nut count is omitted.
- The product FAQ says not to add nuts behind the hinge plates, but V1.2 guide step 3.1 specifies hinge nylock nuts; this listing follows the guide.
- The product FAQ describes a lower-hinge rubber spacer as optional if the unit does not rub, while V1.2 guide step 4.1 places the bushing in the through-door support assembly; this listing follows the guide.
- The product page describes bolt-on mounting to factory hardware, while V1.2 guide step 2 requires drilling through the door; this listing follows the guide.
Lead Time
Free shipping: most continental-US orders on Shipping policy, all lower-48 orders on FAQ, all orders on Homepage banner; remote-location and special-freight fees may apply.
This product
The product FAQ specifies dispatch within 1–2 business days for in-stock orders and arrival in 3–7 business days.
Warranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
Returns within 30 days of delivery require unused, uninstalled, unassembled items in original packaging; 15% restocking and customer-paid shipping apply; large freight items have additional fees.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon