
White Top Adventures
SPRINTER 170" HIGH ROOF STRATA ROOF RACK
Indexed listing. WNDR Built doesn't sell this product; the button opens whitetopadventures.com.
A configurable roof rack with wrap-ready outer rails
The White Top Adventures Strata rack provides a modular mounting system for rooftop gear. Adjustable crossbars let you arrange mounting positions for solar panels, decking or other equipment, rather than working around a fixed crossbar layout. The rack can be paired with White Top Adventures deck panels and additional crossbars, sold separately.
Its double-sided outer rail mounts can be personalized with a 3M wrap or paint. An included front fairing is optional to install, and the rack supports a light-bar setup using a separately sold adapter. White Top Adventures also offers a matching side ladder and Fiamma awning brackets, so those accessories can be added to the rack as separate purchases.
Adjustable crossbars
Modular crossbars can be positioned for rooftop equipment; additional crossbars are sold separately.
Customizable outer mounts
Double-sided outer rail mounts accept a 3M wrap or custom paint.
Coated fasteners
White Top Adventures describes the fasteners as stainless steel and electro-coated for corrosion resistance.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by White Top Adventures
Mercedes-Benz Sprinter 170" High Roof. Not compatible with 144" Sprinters or other van types.
Satellite-radio clearance
The product FAQ warns that the front fairing can block satellite radio / Sirius XM antennas. Leave the optional fairing off or reposition the antenna if needed.
Roof-rail attachment
The installation guide attaches the rack to the passenger- and driver-side factory roof rails using rail nuts.
Light-bar fit
White Top Adventures' Light Bar Ready section lists aftermarket light bars up to 50" in length. Its LED light-bar adapter is sold separately.
Awning compatibility
White Top Adventures lists the Fiamma F45S wall-mount awning only, not the F80S roof-mount awning. Awning brackets are sold separately; use the lower bracket holes as directed in the product FAQ.
Solar-panel mounting
White Top Adventures lists a usable inside rail width of 53.2 inches. Panels wider than 53.2" must be oriented lengthwise; its Solar Panel Mounting Brackets are sold separately.
Side ladder
White Top Adventures says its side ladder mounts independently to the factory roof rails and works with its roof racks. It does not guarantee third-party ladder compatibility: ladders that sit higher can contact the rack side rail.
Installer requirement
The guide recommends a qualified installer. If you lack mechanical expertise or are unfamiliar with installation procedures, have a certified professional or appropriately skilled person install the rack.
Before use
Examine mounting points and attachments before use, and routinely check for wear or damage, as directed by the installation guide.
Specs, parts & installation
Construction & dimensions
| Product weight | 95.2 lbs |
|---|---|
| Crossbar dimensions | 3.2"x1.5", as stated on the product page |
| Outer rail mounts | 1/4" aluminum, as described in the Double Side Plates and a Full Deck section |
| Usable inside rail width | 53.2 inches, as stated in the product FAQ |
Maker-stated load ratings
| Static load | White Top Adventures states 660 lbs, unless otherwise specified by the manufacturer. |
|---|---|
| Dynamic load | White Top Adventures states 220 lbs, unless otherwise specified by the manufacturer. |
What’s in the box
Rack assembly
Side rails, outer armor plates, crossbars, front fairing and joining components, as shown in the installation guide.
Mounting hardware
Rail nuts, T-blocks, screws, washers, spring lock washers and lock nuts are listed in the guide.
Sold separately
Decking, extra crossbars, the side ladder, Fiamma awning brackets, solar-panel mounting brackets and the LED light-bar adapter are separate purchases.
Installation at a glance
Mounts to the factory roof rails; the guide recommends a qualified installer.
Slide the rail nuts into both factory roof rails and loosely attach the rack side rails. Position the front foot as far forward in the roof rail as it can go. Place and loosely attach the crossbars, then tighten the crossbar bolts before tightening the rack side rails to the roof rails. Do not overtighten.
Tools listed in the guide
- 10 mm wrench
- 17 mm wrench
- 4 mm Allen wrench
- 5 mm Allen wrench
Assembly sequence
- Inspect for shipping damage and check the parts and hardware inventory before starting.
- Slide half the rail nuts into each factory roof rail and space them in groups of two near their final positions.
- Loosely attach the side rails with the specified M10-22 screws, spring lock washers and washers; leave them loose until the crossbars are secured.
- Position the crossbars and loosely attach them with the specified M8-20 screws, spring lock washers and washers.
- If installing the front fairing, the guide suggests bolting it to its crossbar first, then attaching that assembly to the rack.
- Tighten crossbar bolts with the 10 mm wrench without overtightening; the guide allows a dab of blue Loctite before final tightening if concerned about bolts backing out.
- Tighten the side rails to the roof rails using the 17 mm wrench.
Source notes
- White Top Adventures' 170 installation guide and product Compatibility section identify the Sprinter 170 High Roof; the page FAQ instead says 144" fit and answers no to 170" or 170" EXT fit. This listing follows the 170 guide.
- The product page's Light Bar Ready section gives a 50" limit; its Details and description give 51.5", unconfirmed here. This listing uses 50".
- The product Details and guide page 2 assembly bill list eight crossbars; guide page 4 Package Contents lists six. Crossbar quantity is omitted here.
- The guide page 2 assembly bill shows four X braces, while page 4 Package Contents lists two joint plates; joining-component quantities are omitted here.
- The guide page 2 assembly bill lists front, middle and rear rail sections for each side; page 4 Package Contents lists front and rear rail sections. Rail-section quantities are omitted here.
- The guide page 2 assembly bill lists six M6 crossbar anchors, six M6-12 screws, six M6 washers and 74 M8 washers; page 5 lists eight T-blocks, eight M6-12 screws, eight M6 washers and 116 M8 washers. These counts are omitted here.
- The brand FAQ promises free UPS Ground shipping on all lower-48 orders; the shipping policy offers free shipping on most continental-US orders and says large items such as roof racks ship by freight.
Lead Time
Free shipping: most continental-US orders on Shipping policy, all lower-48 orders on FAQ, all orders on Homepage banner; remote-location and special-freight fees may apply.
This product
This product page’s FAQ says in-stock orders ship the same or next business day and arrive in 3–7 business days.
Warranty
Read White Top Adventures warranty policy on WNDR BuiltReturns
Returns within 30 days of delivery require unused, uninstalled, unassembled items in original packaging; 15% restocking and customer-paid shipping apply; large freight items have additional fees.
Read White Top Adventures returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon