
H2.1 Aluminum Rack System
Indexed listing. WNDR Built doesn't sell this product; the button opens vantech.com.
A modular roof rack with a choice of ends
The Vantech H2.1 is an aluminum side-rail roof rack for carrying long cargo, rooftop tents and cargo baskets. Interchangeable front and rear ends change how the rack handles a load: open ends accommodate ladders, canoes and surfboards, while faceplates close an end and a rear roller supports loading and unloading.
The configuration code describes those two ends rather than a different rack family. This listing offers AA, DD, EB and FC. The extended E and F front ends add room ahead of the main rack; the F design also has a lower rail for lights while keeping its upper rail flush with the crossbars for flat cargo.
Interchangeable ends
The side-rail system accepts different front and rear end configurations for open cargo carrying, closed ends or roller loading.
Angled faceplates
The D faceplate is angled at 40 degrees. Vantech says it works as a front wind foil; it can also mount upside down as a basket wall.
Extended front options
E adds a front crossbar and clamp points for fog lights and accessories. F adds a second, lower rail, with an 8-inch gap between the rails for fog lights and light bars.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Vantech
- Mercedes Sprinter · 2007-current · High Roof · 170" EXT
Choose the front and rear ends
Vantech’s two-letter code gives the front end first and the rear end second.
AA
- Looped end caps at the front and rear leave an open-ended rack for long cargo such as ladders, canoes and surfboards.
DD
- 40-degree angled faceplates at the front and rear.
- D faceplates can mount upside down as basket walls.
EB
- E front end extends the rack by 19.5 inches with an added crossbar and accessory clamp points.
- B rear roller supports loading and unloading without dragging cargo across the roof line, brake lights or reflectors.
FC
- F front end extends the rack by 19.5 inches and adds a second, lower rail.
- The 8-inch rail gap accommodates fog lights and light bars; the top rail stays flush with the crossbars for panels and sheet goods.
- C rear vertical faceplate closes the end to stop cargo sliding out.
EB tracks — not included
The EB installation guide requires “Factory/R30 Track (Not Included)”. This requirement is specific to the EB guide.
Roof attachment
Vantech’s FAQ requires factory roof tracks for 2007-or-newer Sprinters.
Available combinations
170" EXT with AA, DD, EB or FC.
Specs, parts & installation
Construction
| Material | Aluminum |
|---|---|
| Color | Black |
Load rating
| Working capacity | Vantech’s product-page specifications state 750 lbs total. |
|---|
EB components — installation guide
| Crossbars | 2.25” X 1” X 60” |
|---|---|
| Cargo rails | 47.25” and 63” |
| Rear roller | 59” |
| Connecting bar | 49” |
| Elbows | 6” |
What’s in the box
EB rack structure
The EB guide lists 12 crossbars, two 47.25” cargo rails, four 63” cargo rails and eight mounting bases.
EB front extension and rear roller
Two E cantilevers, one 49” connecting bar, two 6” elbows, one 59” roller, and driver-side and passenger-side roller U-braces.
EB connectors and hardware
Four connectors, eight connector guides, 14 rubber bar guards, double sliders, washers, lock washers, nuts, nyloc nuts, button-head Allen bolts and tap screws.
Installation at a glance
The EB guide shows assembly in three rack sections followed by attachment to the Sprinter tracks.
Assemble over carpet or cardboard to prevent damage. Press the rubber bar guards into the crossbar channels and put the two extra guards under the first two crossbars. Hand-tighten the mounting hardware first, align the rack, then secure all hardware.
Tools listed in the EB guide
- 1/2” wrench
- 5/32”, 1/4” and 3/16” Allen keys
- Power tool with Phillips head
- Rubber mallet
EB assembly sequence
- Assemble the front, center and rear sections with their crossbars, cargo rails and rubber bar guards.
- Fit the front connecting bar and cantilevers, and the rear roller and U-braces.
- Join the rack sections with the connectors and connector guides.
- Insert four 3” bolt-to-bolt double sliders per track; insert two 2” bolt-to-bolt double sliders underneath the crossbar opening as shown in the guide.
- Fit the mounting bases to the Sprinter tracks; hand-tighten, align, then secure all hardware.
Source notes
- Vantech’s EB installation guide states “Factory/R30 Track (Not Included)”; its FAQ identifies R21 for a 170-inch wheelbase, and this listing follows the EB guide.
- Vantech’s product-page specifications state 750 lbs total; its selected 170" EXT AA capture and FAQ eight-mount rating state 1000 lbs total, which remains unconfirmed here; this listing uses 750 lbs total.
Lead Time
Free ground shipping on orders over $499 to the lower 48 states.
Read Vantech lead time policy on WNDR BuiltWarranty
Read Vantech warranty policy on WNDR BuiltReturns
Read Vantech returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon