
Van Compass
ROCKER GUARDS - SPRINTER 4X4 (2015-2022 144" WHEELBASE ONLY) by VAN COMPASS
Indexed listing. WNDR Built doesn't sell this product; the button opens vancompass.com.
Side steps tied into the chassis
These rocker guards combine a side-entry step with body protection for off-road travel. Upper and lower step plates sandwich the van’s pinch seam, while chassis tie-ins connect the step assembly to the vehicle structure. Van Compass says this reinforcement increases the chassis’s torsional rigidity.
Integrated Hi-Lift jack slots provide vehicle lifting points for recovery or flat-tire changes. The step follows the side of the van, with a slight width taper at the front door sill.
Coated steel surfaces
Steel step plates and chassis brackets have a black powder-coat finish.
Stainless step fasteners
The step-plate mounting hardware is stainless steel with an AL2000 black finish.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Van Compass
Fits Sprinter 2500 and 3500 · 2015-2022 · 4X4 · 144" wheelbase.
Choose your van lift height
The front subframe tie-ins depend on lift height; the maker says vans with a 2" Van Compass lift require a unique mount and all other known variations use the non-lifted version.
Stock Height or Agile RIP kit
- Select for stock height or an Agile RIP kit.
- For the listed 2WD application with a Striker lift kit, select the non-lifted 4x4-height option.
2" Van Compass Lift
- Select for a 2" Van Compass lift.
Drilling required
Installation requires drilling the pinch seam and underbody gussets for the step plates and chassis tie-ins.
Underbody clearance
The manual requires checking for components that interfere with the mid chassis tie-in; batteries in that area on some Sportsmobiles may need to be moved.
Front tie-in spacer condition
The manual requires the ¼” spacer plate when the gap between the rocker and the top of the front chassis tie-in plate exceeds 1/8”.
Conversion exclusions
Not compatible with Storyteller MODE or Winnebago Revel.
2WD with Striker lift
May be installed on a 2WD when equipped with a Striker lift kit; select non-lifted 4x4 height sliders.
Installer guidance
Van Compass’s manuals recommend a certified mechanic. Its FAQ permits DIY installation, but its Warranty Policy requires professional installation according to the instructions for warranty coverage.
Specs, parts & installation
Step plates and chassis mounts
| Step plates | 1/8" steel |
|---|---|
| Chassis mounts | 3/16" steel |
| Finish | Black powdercoat |
| Step surface width | 3.5-4" (van body has slight taper at front door sill) |
Step hardware
| Material and finish | Stainless mounting hardware with AL2000 black finish |
|---|
What’s in the box
Rocker guard plates
Left- and right-side top and bottom step plates.
Chassis tie-ins
Front, middle and rear chassis tie-in brackets.
Installation supplies
Mounting hardware, chassis nut tabs and rocker guard install tool.
Installation at a glance
Product page recommended shop labor: 6 Hours; matching manual estimate: 6-8 hours.
Fit and drill for the step plates, sandwich the pinch seam between the plates, then install the chassis tie-ins with the rocker supported close to level.
The manual calls for a quality jack and two jack stands; an extra set of hands is helpful when fitting the assembled guards.
Installation sequence
- Install one side fully before moving to the other, starting on the driver side.
- Mark the slotted plate holes, remove the top plate and drill; paint exposed metal to prevent corrosion.
- Start all plate hardware before tightening and install the chassis tie-ins in the manual’s sequence.
Tools named in the guide
- Jack and two jack stands; wrench/socket set and 5/32” Allen tool.
- Quick clamps, C-clamps or vise grips, and drill with metal-cutting bits.
Lead Time
Orders ship first-come, first-shipped; international service is described separately on two pages; report loss, missing items or damage within 2 days of tracked delivery.
This product
The product page says these ship in a very long crate and non-commercial addresses may be subject to additional delivery fees.
Warranty
Specified hard parts: original-owner ownership term; Falcon shocks: 1 year; powder coating/excessive zinc corrosion: 60 days; professional installation required.
Read Van Compass warranty policy on WNDR BuiltReturns
Return-window start date varies by page; eligible unused returns incur 20% restocking and customer-paid shipping; electronics, including PedalBox, and CLOSEOUT items are final sale.
Read Van Compass returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon