
Unaka Gear Co.
Rear Ladder System - Tire Carrier
Indexed listing. WNDR Built doesn't sell this product; the button opens unakagearco.com.
A locking spare mount for the rear ladder system
This tire carrier moves a spare from beneath the van onto Unaka’s rear ladder system. It is intended for builds where a larger spare no longer fits underneath, that space is used for a grey water tank, or access below the van is inconvenient.
Two lower support arms hold the tire while the wheel is aligned with the center arm. Unaka says this arrangement transfers the load into the ladder system’s main hinge points to reduce strain on the rear door. The aluminum center arm connects to the ladder frame weldment and is braced with a rear back plate; the tire is retained with a rubber centering cone and threaded locking disc.
One-way locking disc
With the key locked, the disc can tighten clockwise but cannot loosen; unlocking permits rotation in either direction.
Tire-size location notches
Notches on the center support provide an initial tire-size guide. Final adjustment may still be needed once the tire is in place.
Black anodized finish
Unaka describes the carrier as black anodized.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Unaka Gear Co.
For the Unaka Sprinter or Transit Rear Ladder System – Base Kit only; the tire carrier fits the driver-side or passenger-side base system.
Base kit sold separately
This carrier requires a compatible Unaka Rear Ladder System Base Kit, sold separately.
Dually centering cone
Dually setups require Unaka’s Dually Rubber Centering Cone, sold separately; contact Unaka for details.
Installation tools not included
The manual states that the required installation tools are not included.
Off-highway use & vehicle warranty
Unaka’s Refund policy, Terms & Conditions of Sale, states that its parts are intended for off-highway application only and that installation may void warranty coverage on your vehicle.
Tire range
Unaka lists stock 265s through 35" tires.
Before use & maintenance
Unaka requires an initial torque check after 4 to 7 days, a follow-up after 1 month, checks every 3 to 4 months, and checks after moderate driving on bumpy or gravel roads.
Specs, parts & installation
Carrier construction
| Center support arm | Aluminum |
|---|---|
| Finish | Black anodized |
| Manufacturer-listed tire range | Stock 265s to 35" tires |
What’s in the box
Wheel retention
Locking disc, centering cone and center arm.
Lower supports & mounting hardware
Two lower support arms, rubber-cushioned U-bolt and necessary mounting hardware.
Installation at a glance
The carrier bolts onto a separately purchased Unaka Rear Ladder System Base Kit.
The manual gives the same carrier installation process for driver-side and passenger-side base kits. Fit the lower arms, locate the center arm, then adjust it with the tire resting on the supports before fitting the cone and locking disc.
Unaka recommends professional installation or following its detailed manual.
Carrier assembly
- Remove the base frame’s lower tube caps, insert the lower support arms, reinstall their hardware and torque to 11ft-lbs.
- Loop the rubber-coated U-bolt around the base frame’s center tube, fit the center arm, apply anti-seize to the sides of the U-bolt, and snug the washers and nuts.
- Rest the tire on the lower supports, adjust center-arm height if needed, then torque the center-arm hardware to 15 ft-lbs.
- Slide the rubber cone onto the arm and grease the inside threads of the locking disc. Align the disc’s internal boss with the arm keyway, thread it on, turn and remove the key in the locked position, then tighten to the desired firmness.
Tools listed in the manual
- ½" and 9/16" sockets and box wrenches; torque wrench (15 ft-lbs).
Lock operation
- When unlocked, the disc turns clockwise or counterclockwise. When locked, it turns clockwise only.
- If the key is difficult to turn, slightly tighten or loosen the disc while turning the key to relieve pressure on the locking mechanism.
Lead Time
Unaka’s Shipping Information page excludes oversized items from free shipping; its Shipping policy also excludes items shipped by LTL freight. For international orders, Shipping Information invites contact if checkout shows no shipping method, while Shipping policy says no displayed option means the country is not served.
This product
The product-page banner advertises free shipping on large Unaka products to the Lower 48; the brand’s oversized-item and LTL exclusions still appear in its policy pages.
Warranty
Unaka’s Refund policy covers workmanship and material defects for the original purchaser for the product’s production lifetime on Unaka-designed and fabricated parts, excluding third-party components, wear parts and modification or misuse; coatings are covered for up to 180 days after purchase.
Read Unaka Gear Co. warranty policy on WNDR BuiltReturns
The Refund policy’s Returns section allows refunds within 30 days of invoice, with a minimum 10% restocking fee if the customer covers shipping or 20% if forgoing shipping costs; its Terms & Conditions of Sale instead states 15 days after receipt and a 15% fee. Returns require an RMA, new condition, original packaging and prepaid freight; custom, electronic, discontinued and specially priced items are excluded, and the Terms & Conditions also excludes opened or installed parts.
Read Unaka Gear Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon