
Front Runner
Front Runner RAM Pro Master 1500 (136" WB/High Roof) (2014-Current) Slimpro Roof Rack Kit
Indexed listing. WNDR Built doesn't sell this product; the button opens dometic.com.
Adjustable roof storage around your van equipment
The Front Runner Slimpro carries gear and provides mounting space for Front Runner accessories above the van. Its slats slide along side profiles, so the load platform can be arranged around rooftop air conditioning, skylights and vents instead of relying on a fixed slat layout.
The mounting feet attach to the van’s existing factory roof fixtures. Invertible slat brackets let you set the platform lower or leave it in the standard configuration. The kit combines the mounting system, slats and a two-piece wind deflector, with additional slats available separately.
Adjustable slats
Slat spacing can be changed after assembly to accommodate roof equipment.
Two rack heights
Invert the included slat brackets for the lower configuration, or retain the standard bracket orientation.
Accessory mounting
Compatible with most Front Runner accessories.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Front Runner
RAM Pro Master 1500 · 2014-current · 136" wheelbase · High Roof · vehicle length 5427mm / 213.7".
Roof load limit
The fitting guide requires following the vehicle manufacturer’s recommended roof rating; do not load beyond the vehicle manufacturer’s stated capacity.
Installer experience
If you do not understand all instructions and cautions, or lack mechanical experience and familiarity with the procedure, the guide says to use a professional installer or other qualified personnel.
Roof A/C layout
If roof A/C is fitted, the guide specifies slat spacing around it at 202mm increments on shorter lengths and 404mm on longer lengths; slats can sit in front of and behind the unit.
Attachment checks
Check attachments before use and periodically inspect for adjustment, wear and damage.
Roof attachment
6 mounting feet secure to the factory roof mounting fixtures.
Additional slats
Additional slats are sold separately.
Specs, parts & installation
Platform & mounting
| Load-carrying area | 2974mm (117.1") x 1565mm (61.6") |
|---|---|
| Lower configuration height | 85mm (3.4") |
| Standard configuration height | 127mm (5") |
| Slat assemblies | 8 |
| Mounting feet | 6 |
What’s in the box
Side profiles
Two 1358mm side profiles and two 1560mm side profiles.
Slat assemblies
8 narrow slats, 16 narrow slat end caps and 16 slat Z brackets, with bolts, Nyloc nuts and nut caps.
Mounting feet
6 feet and 6 inner foot plates, with rubber U trim, washers, bolts, Nyloc nuts and nut caps.
Joiners, deflector & end caps
One joiner kit containing two joiner bars, two joiner plates and eight M6 x 16 button head bolts; one left/right wind-deflector pair with hardware; four van track end caps.
Hardware & guide
All mounting hardware and the fitment guide.
Installation at a glance
No drilling or vehicle modification is required, according to the product page. A helper is needed to place and secure the assembled side profiles.
Locate the factory roof fixtures, fit the inner foot plates, assemble the side profiles and feet, then install the wind deflector and slats. Fit rubber trim to both sides of each foot. Read the matching fitting instruction for all assembly and fastening details.
Tools listed in the fitting guide
- 4mm and 5mm tools; 13mm tool; a helper.
Assembly details
- Seat each inner foot plate straight against the factory fixture.
- Keep the feet loose enough to slide while assembling the side profiles, then secure them to the roof.
- Leave a 10mm gap between the left and right wind deflectors.
- Space slats at 404mm increments or your chosen spacing, subject to the roof A/C condition above.
- Fully tighten all fasteners and fit nut caps over hex bolts and Nyloc nuts.
Source notes
- The product-page purchase block lists a 3-year warranty; its description says Front Runner racks have a limited lifetime warranty. The shorter term is shown here.
- Dometic’s shipping policy lists 3–5 business days for processing and shipping; its warranty-page footer lists dispatch within 1–2 business days; its Shipping & Returns page says orders placed on dometic.com before 3 p.m. central time ship the same day.
- The fitting guide’s wind-deflector assembly step labels the deflector Item 5, while the parts list identifies it as Item 4.
Lead Time
This product
The product page marks this kit in stock and ready to ship within 1–2 days.
Warranty
This product
The product-page purchase block lists a 3-year warranty.
Returns
Dometic direct returns: 30 days for unused, uncustomized goods with approval; its pages differ on whether the clock starts at purchase or delivery, and on return shipping.
Read Front Runner returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon