
Rover Vans
Rover Vans Tire Carrier & Ladder Combo for Ram ProMaster
Indexed listing. WNDR Built doesn't sell this product; the button opens rovervans.com.
An exterior spare with an integrated route to the roof
The Rover Vans ProMaster Tire Carrier & Ladder moves a full-size spare outside the van and adds access to the roof rack and rooftop gear. Factory rear-door hinges support the assembly, while integrated foot pegs provide boot space for climbing around the tire.
The current design uses a single-hole-through-door carrier mount with an included door reinforcement. Rover says this arrangement helps control vibration and distribute loads at the mounting area. It does not require cutting the factory weather stripping or relocating the door striker. A hinge limiter strap and a license plate relocation kit are part of the system.
Aluminum structure
The tire carrier and ladder are made from aluminum.
Protected hardware
Rover specifies automotive-grade, OEM-quality fasteners and mounting components with protective anti-corrosion coatings.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Rover Vans
Ram ProMaster, High + Super High roof. The installation guide specifies the driver-side rear door.
Choose your wheel option
The maker offers separate stock and aftermarket wheel options.
Stock Promaster
- Stock ProMaster wheels.
Aftermarket
- Aftermarket wheels.
Door drilling required
The guide requires drilling for the internal door brace and through the door and brace for the carrier mount. The license plate relocation requires additional holes for its mounting bolts and light wire. Deburr the holes and protect exposed metal with rust-preventing paint.
License plate wiring
The relocation guide calls for cutting and connecting factory wiring, and says all wiring modifications should be done by an automotive technician.
Supported door & limiter assembly
The carrier guide calls for a helper to support the door while hinge bolts are removed and to hold the carrier during fitting. Keep the limiter spring assembly behind the wiring so they cannot catch on each other; secure the tensioned strap assembly with its bolts.
Specs, parts & installation
Construction & rear projection
| Material | Aluminum |
|---|---|
| Projection with spare installed | Rover Vans states the measurement from the back of the van with the spare tire installed is 14" |
What’s in the box
Carrier, ladder & wheel mounting
Tire carrier/ladder rack, foot pegs and bolts, two tire prongs and bolts, threaded rod, square washer, lock washer, tire cone and winged handle.
Hinge & door mounting
Upper and lower hinge brackets, two double-bolt plates, drill-through plate and gasket, U bracket, door reinforcement and mounting hardware.
Door limiter
Hinge limiter strap; the guide’s Driver Door Stopper Kit lists a bent door stopper, spring assembly, four M6x20 bolts and two M6 nuts.
License plate relocation
Included relocation kit; its guide lists the plate body, body mounting hardware, plate mounting hardware, connectors and connector wire.
Installation at a glance
Rover’s carrier guide lists 1.5 - 2 Hours and calls for a helper; the license plate relocation guide separately lists 60 - 90 Minutes.
Remove the interior door paneling, fit the hinge brackets and reinforced drilled mount, attach the carrier, then fit the tire holder and door-limiter assembly. Relocate the license plate using the separate guide.
Tools from the carrier guide
- 13mm wrench
- T35 Torx bit
- Allen key set
- Power drill
- Deburring tool
Tools from the license plate guide
- Drill with 5/16" bit
- 11mm wrench and 5mm Allen wrench
- Electrical tape and Phillips head screwdriver
- Wire crimpers and heat gun
Lead Time
Rover Vans’ FAQ says in-stock orders dispatch immediately; out-of-stock lead time is approximately 7 working days.
Read Rover Vans lead time policy on WNDR BuiltWarranty
Rover Vans’ FAQ says guarantee details depend on the type of product ordered.
This product
Rover Vans’ product page states a 5-year product warranty and a 10-year no-fade finish warranty.
Returns
The refund policy allows return requests within 30 days of receipt; the FAQ specifies a 20% restocking fee.
Read Rover Vans returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
Installation was easy with everything fitting perfectly.
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon