
Ranger Design
Max Step – RAM ProMaster Rear Step – 6550-RP
Indexed listing. WNDR Built doesn't sell this product; the button opens rangerdesign.com.
A rear access step with anti-slip tread plates
Ranger Design’s Max Step is a rear access step with a steel structure, anti-slip plastic tread plates and reflective tape. It provides a stepping surface at the rear of the van and has an electrostatic-painted finish.
The step and its vehicle-specific support are separate assemblies joined with the fasteners shown in Ranger Design’s installation guide.
Exterior application
Ranger Design lists the step for exterior use.
Step load limit
Ranger Design specifies a maximum of 300 lbs.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Ranger Design
RAM ProMaster
Factory equipment exclusions
Can only be installed when no factory step and no tow receiver are installed.
Backup sensors
Ranger Design states that installation may interfere with the backup sensors.
Drilling required
Its warning sheet states that drilling is required; the illustrated installation sequence must be followed for the correct vehicle. Inspect the mounting area for vehicle components before drilling, use a drill collar and follow the vehicle maker’s permitted drilling locations.
Installation hardware
Use Ranger Design-provided fasteners and brackets, and follow the installation guide.
Vehicle load limits
Check the vehicle’s tare weight and remaining load capacity with all equipment installed. Do not exceed the vehicle manufacturer’s GVWR, GAWRs or other permitted maximum loads.
Inspection and maintenance
Regularly inspect, clean and maintain system components according to Ranger Design’s guidelines. After an accident or collision, the system must be inspected before the vehicle returns to service; replace damaged components as necessary.
Specs, parts & installation
Construction
| Structure | Steel with anti-slip plastic tread plates and reflective tape. |
|---|---|
| Finish | Electrostatic paint. |
| Application | Exterior |
Dimensions and capacity
| Dimensions | 56 × 7.5 × 2.5 in |
|---|---|
| Weight | 22 lbs |
| Step load limit | Ranger Design specifies a maximum of 300 lbs. |
What’s in the box
Step
Rear step assembly
Support and mounting hardware
Vehicle-specific support assembly and fastener kits shown in the exact installation guide.
Installation at a glance
Ranger Design lists 0.80 hours.
The exact Revision A2 guide specifies one installer and the vehicle-specific support and fastener assembly.
Tools listed in the installation guide
- Ratchet
- 13mm Wrench ×2
- 17mm Wrench ×1
- 17mm Socket ×1
Lead Time
Outside the U.S. and Canada, buy through Ranger’s distributor network and arrange your own export.
Read Ranger Design lead time policy on WNDR BuiltWarranty
Warranty against workmanship and material defects: 1 year, 3 years or 10 years by product category under Schedule A; Max Steps: 3 years; original purchaser only.
Read Ranger Design warranty policy on WNDR BuiltReturns
Read Ranger Design returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon