
Orion Van Gear
Ford Transit Stealth+ Roof Rack
Indexed listing. WNDR Built doesn't sell this product; the button opens orionvangear.com.
A modular roof layout for solar, storage and deck space
Orion Van Gear’s Transit Stealth+ Roof Rack provides an adjustable framework for rooftop solar panels, storage and accessories. Its aluminum side rails and movable 1020 crossbars let the layout be arranged around rooftop equipment, rather than fixing every crossbar in one position.
Front and rear wind fairings form the ends of the rack, with a UV-resistant powder-coated finish on the aluminum construction. The rack is made in Oregon.
The modular system supports separately purchased deck panels, solar mounting brackets, ladders and other upgrades. Orion also offers CAD-verified roof layouts that account for existing equipment and the space available, so the roof arrangement can be planned before installation.
Adjustable crossbars
Fully adjustable 1020 aluminum crossbars can move forward or backward along the side rails.
Rear lighting option
The rear deflector is available with two flush scene lights.
Deck and solar upgrades
Modular deck panels, walkable solar panels and rigid solar panel brackets are available separately.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Orion Van Gear
- 2015+ Ford Transit 148 Mid Roof vans
- 2015+ Ford Transit 148 High Roof vans
- 2015+ Ford Transit 148 EXT High Roof vans
- 2023+ Ford Transit Trail
Choose the rack size
Match the Size option to the van’s roof height and body length.
Transit 148 Mid Roof
- For the 148 Mid Roof van
Transit 148 High Roof
- For the 148 High Roof van
Transit 148 Extended High Roof
- For the 148 EXT High Roof van
Choose the rear deflector
Both Rear Deflector options are listed for all three rack sizes.
Standard
- Rear wind fairing with light plates
Upgraded w/ 2 Scene Lights + Harness
- Two rear flush scene lights.
Conditional roof-hole grinding
If Ford’s threaded inserts are misaligned with the roof access holes, the installation guides call for grinding the access holes with a Dremel or similar tool. They recommend primer on ground surfaces; the Extended High Roof guide also says not to force-thread the M8 bolts.
Awning compatibility
Not directly compatible with Fiamma F65 or F80 awnings; Orion recommends the F45s.
Roof load limits
Orion recommends following the vehicle manufacturer’s published roof load limits.
Installer and inspection requirements
Orion strongly recommends professional installation. Installers must read, understand and follow the instructions and warnings. Check mounting points and attachments before use and regularly inspect for wear or damage.
Factory antenna
Orion states compatibility with 26/27 models with the updated factory antenna placement, without modification to the rack or antenna.
Mounting interface
Mounts to Ford’s internal threaded roof inserts using the model-specific mounting feet and foot washers.
Accessory planning
Crossbar spacing must suit the installation guides for the chosen accessories before tightening. Aftermarket accessories or vehicle modifications require a fitment check; Orion does not guarantee compatibility with them.
Board pole upgrade
The separately sold board pole is for high-roof vans only.
Specs, parts & installation
Construction
| Rack | All-aluminum construction |
|---|---|
| Hardware | Stainless steel |
| Finish | UV-resistant powder coating |
| Crossbars | 1020 10 Series aluminum |
| Made in | Oregon, USA |
All three sizes
| Height | 5.7" |
|---|---|
| Usable width | 62" |
| Crossbar length | 62” |
| Crossbar allocation | One crossbar is used in the front deflector assembly. |
Transit 148 Mid Roof
| Weight | 80 lbs |
|---|---|
| Usable length | ~125" |
| Crossbars | 6 |
Transit 148 High Roof
| Weight | 85 lbs |
|---|---|
| Usable length | ~120" |
| Crossbars | 6 |
Transit 148 EXT High Roof
| Weight | 95 lbs |
|---|---|
| Usable length | ~148.5" |
| Crossbars | 7 |
What’s in the box
Rack structure
Left and right front and rear rails, front and rear deflectors, connection plates, braces, link plates, crossbars and front/rear Trim-Lok bulb strips. The Standard deflector uses two light plates.
Size-specific parts
Mid Roof and High Roof kits have six crossbars and eight 3M foot gaskets. Extended High Roof has seven crossbars, ten 3M foot gaskets, left and right extension rails and two rear support brackets. One crossbar is used in the front deflector in each size. Mid Roof uses two slotted front braces and one rear brace.
Hardware and assembly supplies
Stainless steel hardware, foot washers, one 5/32” ball-end Allen key and one blue medium-strength threadlock.
Scene-light option
Two flush scene lights with the upgraded rear deflector. The installation guides list the wire harness as sold separately.
Separate accessories
Deck panels, solar panels and their brackets, ladders, board poles, awnings and other listed upgrades are sold separately. Anti-seize is optional with Orion’s new hardware and is no longer included, according to its installation hub.
Installation at a glance
The model-specific guides state 2 - 3 hours; Orion strongly recommends professional installation.
Remove the roof paint caps to reach the threaded inserts: eight on 148 Mid Roof/High Roof or ten on Extended High Roof. Apply the supplied foot gaskets and assemble the rack using the matching guide.
Use hand tools only for the fasteners; the guides warn that power tools can overheat bolts, cause galling or overtighten connections.
Provide 10.3oz Black Dicor Lap Sealant and a caulking gun. Seal each mounting foot, foot washer and M8 bolt, allow the sealant to cure according to its manufacturer’s instructions, then leak-test and add sealant if needed.
Orion recommends an extra person, an extra ladder and protective rags. Inspect for missing or damaged parts and report them before beginning installation.
Tools and supplies listed in the guides
- 1/2" socket and ratchet drive; 7/16” wrench; step ladder; tape measure.
- Heat gun or hair dryer; plastic scraper or razor blade.
- 10.3oz Black Dicor Lap Sealant and caulking gun.
- If roof mounting holes are misaligned: Dremel or similar metal cutting tool, plus primer or paint.
Alignment and assembly details
- Orient each foot washer to align with the threaded insert while covering the square mounting-foot hole.
- Align the rack joint with the van seam and center the rack so the side rails do not contact the van; compress the deflectors’ Trim-Lok bulbs as directed.
- Avoid overtightening crossbar and link-plate screws, which can mar the rail slots. Keep temporary crossbar placements loose, then verify accessory spacing before final tightening and threadlock.
- On Extended High Roof, install both rear support brackets with their bottoms contacting the van; a bead of sealant or VHB tape at that contact is optional.
Source notes
- Orion’s Transit roof-rack overview page says the rack mounts to factory roof rails; the model-specific installation guides specify Ford’s internal threaded inserts. This listing follows the guides.
- Orion’s product page says no cutting, and its Transit rack overview page says no cutting or drilling; the installation guides require grinding access holes if the factory threaded inserts are misaligned. This listing follows the guides.
- Orion’s live selector names the upgrade “Upgraded w/ 2 Scene Lights + Harness”; all three model-specific installation guides say “Wire Harness Sold Separately.” The selector names are preserved, but the contents description follows the guides.
Lead Time
Most items ship within 1–3 business days; racks and large assemblies may vary, and shipping is free to the lower 48.
Read Orion Van Gear lead time policy on WNDR BuiltWarranty
Orion-made structures: limited lifetime warranty for original retail purchaser; powder coat: 180 days; correct installation required; claim authorization and potentially customer-paid return shipping both ways.
Read Orion Van Gear warranty policy on WNDR BuiltReturns
Eligible purchases may be returned within 30 days of purchase, with a 20% restocking fee and customer-paid return shipping.
Read Orion Van Gear returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
The fit is great, the install was straightforward, and their support was super helpful.
View originalThe installation was very straight forward and everything lined up perfectly with the exception of 2 holes on the Transit that did not perfectly line up.
View originalHave had it on for a year now and have no noise, vibration or wind drag issues.
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon