
Flatline Van Co.
Sprinter Van Apex Side Ladder
Indexed listing. WNDR Built doesn't sell this product; the button opens flatlinevanco.com.
Roof access with a narrower lower ladder
The Sprinter Apex Side Ladder provides access to rooftop gear and solar panels. Its lower steps narrow toward the base and angle for climbing, allowing the ladder to sit farther back than Flatline’s standard Sprinter side ladder.
A machined coupler joins the two ladder halves. A clevis-style upper mount connects to the roof rail, while a single machined lower bracket attaches at the pinch seam. Flatline describes that lower-mount layout as preserving ground clearance.
Dimpled steps
Formed oval dimples provide the step’s traction surface.
Accessory attachment
Slots and holes in the step faces provide mounting points for accessories.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Flatline Van Co.
- 2007+ Sprinter 1500/2500/3500/3500XD · 144 in / 170 in / 170 in EXT · Low/High Roof, as listed in the product-page fitment notes
- 2017+ High Roof Winnebago Revel
Drilling and rivet nuts required
The linked guide requires drilling for the lower mounting bracket, setting rivet nuts and drilling the pinch seam for its backer plate. Deburr and paint exposed metal. A rivet-nut tool is required.
Keep drain openings clear
The guide says not to block or completely seal the pinch-seam weep holes when positioning the lower bracket.
Access around existing accessories
A roof rack, side steps, water tank or other fitted accessories may need to be loosened or temporarily removed to reach the roof rail and pinch seam.
Window clearance
Flatline states that the narrower lower steps permit rearward placement so T-vent or pop-out windows can open fully on a Sprinter 144.
Roof rails and accessories
Mounts to roof rails. Flatline describes integration with its Sprinter roof racks for high-roof vans and compatibility with the Sprinter Surf Pole through the ladder’s 1.25 in tubing.
Installer requirement
Flatline recommends professional installation; anyone with no mechanical experience who is not thoroughly familiar with the procedure must use a professional installer or other qualified person, as stated in the linked guide.
Before use
As required by the linked guide, check mounting points and attachments before use and regularly inspect the product for wear or damage.
Specs, parts & installation
Ladder construction
| Tubing | 1.25 in aluminum tubing |
|---|---|
| Step width | 13.24 in |
| Steps | Formed and dimpled |
| Mounts | Machined billet |
| Weight | 18 lb |
What’s in the box
Ladder and upper mounts
Upper and lower ladder halves, left and right clevis mounts.
Lower mount and hardware
Pinch-seam mounting bracket, pinch-seam backer plate, rail nuts, rivet nuts and mounting hardware, as listed in the linked guide.
Installation at a glance
The linked guide lists one hour and suggests additional help for some steps.
Join the ladder halves, fit the upper clevis mounts to the roof rail, drill and prepare the lower bracket locations, set rivet nuts and attach the bracket and backer plate.
Hang the ladder, align it with the lower mount and tighten the fasteners.
Tools listed in the guide
- 3/16 in, 7/32 in and 5/16 in Allen wrenches; 6 mm Allen wrench
- Ratcheting wrench, 7/16 in and 9/16 in wrenches or sockets
- Power drill, 1/4 in and 25/64 in drill bits, impact drill and rivet-nut tool
- Rust-preventative paint, center punch and quick-grip clamps
Lead Time
Flatline’s FAQ lists in-stock dispatch in 1–2 business days and free lower-48 shipping; its Shipping policy lists flat-rate shipping or potentially free, slower economy shipping, with typical LTL delivery in 7–21 business days.
Read Flatline Van Co. lead time policy on WNDR BuiltWarranty
The Refund policy gives the original purchaser a one-year limited warranty covering product cost only, excluding installation, labor, freight, wear, misuse and racing, competition or trail-use damage, and void for alteration, modification or improper installation.
Read Flatline Van Co. warranty policy on WNDR BuiltReturns
Unused items in resalable condition and original packaging may be returned within 30 days of receipt with a pre-authorized RMA and a 20% restocking fee; customers pay return shipping unless Flatline erred, LTL returns need coordination, clearance/garage-sale/final-sale items are excluded, and custom or made-to-order items may be non-returnable.
Read Flatline Van Co. returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Owner reports
Quotes from owners and installers, with links to where they were posted. These are owner reports, not manufacturer-confirmed information, and may describe a different van or year than yours. Verify before you buy.
It takes a little more work to install due to the 7 bolts in the bottom mounting plate
View originalonce the plate is bolted down the ladder is rock solid and has no affect on ground clearance or ability to see and place your rear tire where you need while navigating tight off road trails.
View originalYou have to be precise when making the holes to install the bottom part correctly.
View originalSearches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon