
Aluminess
Recon Modular Roof Rack - 2007-26 Sprinter
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
A roof rack layout you can change
The Aluminess Recon Modular Roof Rack lets you plan a Sprinter roof around the gear you want to carry, without fixing the flooring layout at the outset. Its removable crossbars connect the side rails and can be repositioned to suit vent locations and flooring panels. The crossbar layout can change with your roof layout.
The rack can carry solar panels and accommodate accessories such as rooftop tents, awnings and lights. Flooring is a separate choice: add panels where your layout calls for them, or use the rack for solar and a smaller selection of accessories. Aluminess offers modular panel kits as well as individual flooring panels, so the base rack and the finished floor are separate purchases.
Front air dam
A front air dam is included; Aluminess lists minimizing wind resistance among the rack’s functions.
FrontLoader flooring
The separately sold flooring panels use Aluminess’s FrontLoader system, which Aluminess states is compatible with its entire accessory line.
Awning mounting option
Optional brackets accommodate Fiamma F45 or similar wall-mounted awnings.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2007-2025 Mercedes-Benz Sprinter
- 2010-2026 Mercedes-Benz Sprinter 2500
- 2010-2026 Mercedes-Benz Sprinter 3500
- 2018-2026 Mercedes-Benz Sprinter 3500XD
- 2019-2025 Mercedes-Benz Sprinter 1500
- 2019-2025 Mercedes-Benz Sprinter 4500
- High roof: 144-inch wheelbase, 170-inch regular body or 170-inch extended body.
Choose your wheelbase and roof type
Match the rack to the van’s wheelbase and body length; each listed version is high roof.
144" High Roof
- 144-inch wheelbase, high roof.
170" Regular Body High Roof
- 170-inch wheelbase, regular body, high roof.
170" Extended Body High Roof
- 170-inch wheelbase, extended body, high roof.
Optional flooring kits
The maker’s page offers these flooring add-ons; flooring panels and additional accessories are not included with the base rack.
Starter flooring kits
- None
- Vent Kit
- AC Kit
- Single Row Full Width
Half rack flooring kits
- None
- Sprinter 144
- Sprinter 170 Regular Body
- Sprinter 170 Extended Body or Promaster 159 Extended Body
Full rack flooring kits
- None
- Sprinter 144
- Sprinter 170 Regular Body
- Sprinter 170 Extended Body
Converted vehicles
Aluminess designs its products for factory-manufactured vehicles; some aftermarket conversions are incompatible. Contact Aluminess customer service with product compatibility questions.
Vehicle roof rating
Refer to the vehicle manufacturer’s recommended maximum weight rating before operating the vehicle; the rack’s stated capacity does not replace that rating.
Two-person lift
Installation requires two or more people to lift the rack onto the vehicle.
Roof rails
Stock or aftermarket roof rails are required on all Sprinter models.
Flooring and solar pairing
Aluminess lists the Zamp 100 Obsidian as fitting the separately sold Long Panel.
Crossbar layout
Install crossbars horizontally only, in the top or bottom slots of the side rails. Space them around vents and the dimensions of any flooring panels.
Specs, parts & installation
Load rating
| Maker-stated capacity | Aluminess’s installation guides state “200 lbs per panel, or 600lbs evenly distributed.” Refer to the vehicle manufacturer’s recommended maximum weight rating before operating the vehicle. |
|---|
What’s in the box
Rack structure
Driver- and passenger-side rails, side-rail brackets, removable narrow crossbars and a front air dam.
Crossbars by version
The installation guides list 5 narrow crossbars for the 144-inch rack, 7 for the 170-inch regular-body rack and 9 for the 170-inch extended-body rack.
Air-dam and mounting parts
An air-dam support channel, rubber trim, Sprinter mounting brackets, track threaded inserts, assembly hardware and anti-seize lubricant are listed in the guides.
Sold separately
Flooring panels and additional roof rack accessories are not included with the base rack.
Installation at a glance
Two or more people and a standard wrench set are required.
Assemble the side rails, mounting brackets, horizontal crossbars and air dam, then mount the rack to the roof-track system using the supplied studded inserts. Orient the mounting-bracket offset toward the van and follow the matching guide’s placement figures.
Apply supplied anti-seize lubricant to the threads before installation. Tighten the ¼”-20 nuts on the studded roof-track inserts to 6 ft-lbs.; do not overtighten.
For the 170-inch regular-body version, slide the rack all the way back until the front rubber trim contacts the roof; the guide says a gap can create wind noise.
Check all bolts after the first 100 miles of driving and periodically thereafter.
Assembly sequence
- Protect the powdercoating with blankets or towels while assembling the rack.
- Connect the front and rear side rails on both sides using the side-rail brackets and associated carriage bolts.
- Install the rubber trim along the front edge of the air dam.
- Position the air-dam support channel as shown in the matching guide. Fasten the sides of the air dam to the support channel before fastening the top face, then tighten the hardware.
- Attach the air-dam subassembly to the rack. Slide the studded inserts along each roof track to the approximate mounting-bracket positions, then lift the rack onto them.
Source notes
- Aluminess’s product page says “Includes 6-10 Removable Crossbars according to the Wheel Base”; its 144-inch, 170-inch regular-body and 170-inch extended-body installation guides list 5, 7 and 9 narrow crossbars respectively, plus a separate air-dam support channel. This listing follows the installation guides.
- The product page says crossbars can be placed anywhere; all three installation guides restrict them to horizontal mounting in the top or bottom side-rail slots. This listing follows the guides.
- All three installation guides say the front and rear rack edges must be greater than or equal to 14” from the mounting-bracket centers, while their placement figures show >14”. Follow the placement figures in the matching guide.
- Aluminess’s Warranty Information page says roof racks do not qualify for free shipping; this product page advertises free shipping.
- The product title says 2007-26 Sprinter, while its Detailed Specs list model-specific year ranges. Vehicle fitment above reproduces those model-specific ranges.
- The installation-guide hardware tables label 70367 as the split washer and 70366 as the flat washer; assembly figures reverse those descriptions. This listing does not assign washer types to those hardware numbers.
Lead Time
Ships after full payment; bumpers and roof racks require LTL freight and are excluded from free shipping; destination surcharges may apply; note damage before signing.
This product
Aluminess’s product page advertises free shipping for this rack.
Warranty
Lifetime warranty for the original retail purchaser requires correct installation under official instructions; modifications void coverage; exclusions apply, and claim shipping both ways may be customer-paid.
Read Aluminess warranty policy on WNDR BuiltReturns
Authorized nondefective returns within 15 days; custom/special orders excluded; roof racks require another buyer; refunds deduct all shipping, including Aluminess-paid outbound costs, and any restoration costs.
This product
Aluminess’s Refund Policy classifies all roof racks as special orders, non-refundable unless a new buyer is found.
What are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon