
Aluminess
Rear Door Rack Base Unit - 2015-26 Ford Transit
Indexed listing. WNDR Built doesn't sell this product; the button opens aluminess.com.
A modular mounting base for rear-door gear
The Aluminess Rear Door Rack Base Unit provides a mounting foundation for bikes, storage boxes and other gear on the passenger-side rear door of a Ford Transit. Hinge brackets and inner door brackets secure the base rack, while clamp-on support posts provide a place to mount a box.
The system can be configured for horizontal or vertical bike mounting, Aluminess storage boxes, BackPACK plates or the motorized PowerLift system. Roof height and the selected base-rack configuration determine PowerLift compatibility. Boxes, bike trays, the PowerLift battery and other accessories are sold separately, so the base unit is a starting point for a chosen storage setup rather than a complete gear package.
Textured black finish
The rack has a textured black powder-coated finish.
Backup sensors
Aluminess describes the rack as backup-sensor friendly, with no false alerts or interference.
Longer support-post option
Aluminess offers optional 22" support posts in addition to the included 8" posts.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Aluminess
- 2015–2026 Ford Transit, Transit-150, Transit-250, Transit-350 and Transit-350 HD.
- Low-roof and medium/high-roof configurations are available.
Choose your roof configuration
Select the rack for your Transit roof height and use its corresponding installation guide.
With Medium or High Roof
- For medium- or high-roof Transit vans.
With Low Roof
- For low-roof Transit vans.
Choose your base rack configuration
Both roof configurations offer all three base-rack choices.
Box mount only
- Box-mount configuration.
Horizontal Bike Rack (NOT Compatible with PowerLift)
- Horizontal bike-mounting configuration; not compatible with PowerLift.
Vertical Bike Rack (NOT Compatible with PowerLift)
- Vertical bike-mounting configuration; not compatible with PowerLift.
Optional boxes and bike trays
The maker offers these add-ons separately from the base rack.
Box Option
- None, Deluxe Box, Explorer Box or Slim Box.
- Slim Box cannot be ordered with PowerLift.
Bike Tray Options
- None, Rocky Mount, 1-Up Standard Duty or 1-Up Super Duty.
- Aluminess recommends 1-Up Super Duty for e-bikes.
Conditional door drilling
Both roof-specific installation guides require four ¼” holes for the upper inner bracket when the passenger door has no upper inside handle, identified in the guides as 2015–2019.
Box-mount drilling
Mounting a box requires drilling 5/16” holes through its back into the rack cross pipe and through its bottom into the support posts.
Vehicle and use checks
Aluminess states its products are designed for off-road vehicle use; the purchaser must determine suitability for the intended use and review local vehicle codes before purchase.
California warning
Aluminess lists a cancer and reproductive harm warning: www.P65Warnings.ca.gov.
Door attachment
Mounts to the passenger-side rear door; Aluminess lists compatibility with both 180° and 270° rear door hinges.
PowerLift roof requirement
PowerLift compatibility is limited to Transit Mid & High Roof models.
Converted vehicles
Aluminess lists Storyteller and Vandoit builds, but states its products are designed for factory-manufactured vehicles and some aftermarket conversions are incompatible; contact Aluminess for conversion-specific compatibility questions.
Specs, parts & installation
Rack & support posts
| Finish | Textured black powder coat |
|---|---|
| Dynamic weight capacity | Aluminess states 200 lbs (evenly distributed). |
| Included support-post length | 8" |
| Optional support-post length | 22" |
Shipping dimensions
| Height | 7 IN. |
|---|---|
| Width | 61 IN. |
| Depth | 33 IN. |
| Shipping weight | 30 LBS. |
What’s in the box
Base rack & brackets
Rear door base rack, upper and lower hinge brackets, inner door bracket and upper inner passenger-door bracket; the low-roof guide specifies a low-roof upper hinge bracket.
Support posts
Two 8” support posts, as listed in both roof-specific guides.
Hardware & protection
Mounting bolts, screws, nuts and washers, an anti-seize lubricant packet and protective tape.
Sold separately
Boxes, bike trays, PowerLift battery and other accessories are sold separately; box and bike-tray add-ons can be selected on the maker page.
Installation at a glance
Installation requires two or more people.
Support the door’s weight throughout hinge-bracket installation; the guides reuse factory hinge hardware. Apply anti-seize lubricant to the threads of each bolt before assembly to prevent stainless-steel hardware binding.
For doors with an upper inside handle, identified as 2020+ in the guides, remove the handle and latch hardware and sandwich the upper inner bracket between the door and latch handle, then reinstall with factory hardware.
Apply protective tape above 60°F and out of direct sunlight. Follow the roof-specific guide and verify bracket clearance while slowly opening and closing both rear doors.
Tools & supplies
- Standard and metric wrench and socket sets; Torx bit set; drill or impact driver.
- Isopropyl alcohol, baby soap or dish soap, spray bottle, clean rag and squeegee or old credit card.
- For the upper-inside-handle procedure, the guides specify a flathead screwdriver and 7mm socket.
Mounting sequence
- Cut and wet-apply the supplied protective tape where brackets contact the door.
- Install upper and lower hinge brackets while a helper supports the door, then install the inner door brackets. Hold the inside latch to prevent it falling into the door during latch-bolt removal.
- For a door without the upper inside handle, remove plastic coverings and peel back the liner if applicable; dry-fit the bracket before marking and drilling the holes. Install the bracket, reseal the liner and replace coverings.
- Loosely attach the base rack to the brackets and tighten the upper and lower hinge brackets first. If the center-bracket gap exceeds 1/8”, use the supplied 1/8” THK washers as shims to close it to ≤ 1/8”.
- When mounting a box, level and space the support posts for the box position; the low-roof guide also says to square the posts to the unit.
Source notes
- Aluminess’s product page says no drilling is required; both roof-specific installation guides require four ¼” holes when the passenger door lacks an upper inside handle (identified as 2015–2019). This listing follows the guides.
- The product-page no-drilling statement also differs from both guides’ requirement for 5/16” holes when mounting a box; this listing follows the guides.
- The low-roof guide’s parts table calls one bracket “Inner Driver Door Bracket, Passenger”; its installation steps place the inner bracket on the passenger door. This listing follows the installation steps.
Lead Time
Bumpers and roof racks ship by LTL freight and do not qualify for free shipping; destination charges may apply. Inspect and record shipping damage before signing.
Read Aluminess lead time policy on WNDR BuiltWarranty
Lifetime warranty for the original retail purchaser requires correct installation under official instructions; modifications void coverage; exclusions apply, and claim shipping both ways may be customer-paid.
Read Aluminess warranty policy on WNDR BuiltReturns
Authorized nondefective returns within 15 days; custom/special orders excluded; roof racks require another buyer; refunds deduct all shipping, including Aluminess-paid outbound costs, and any restoration costs.
Read Aluminess returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon