
Agile Off Road
Rear Door Tire Carrier for 2019+ VS30 Sprinter by Agile Offroad
Indexed listing. WNDR Built doesn't sell this product; the button opens agileoffroad.com.
Rear-door spare storage with an included reinforcement brace
This carrier relocates the Sprinter’s spare wheel and tire to the driver-side rear door, freeing the space beneath the van for other accessories. Agile Offroad says rear-door storage gives access to the spare and accommodates a larger-than-stock tire.
The mount follows the door’s swing and distributes the load across its hinges. An included reinforcement brace is intended to reduce door flex from the tire’s weight, while a locating lug pin helps position the wheel during mounting.
Powder-coated steel
The steel carrier has a textured black powder-coated finish and stainless steel hardware.
Replacement emblem
A replacement rear emblem and billet aluminum logo badge are included.
Manufacturer-listed fitment & checks
Vehicle fitment
As listed by Agile Off Road
- Mercedes Sprinter 2500 & 3500 (2WD & 4×4)
- Third Generation (VS30) 2019+
Choose your wheel hardware
Each option includes the carrier, mounting hardware, limited-travel door stops and rear door reinforcement brace; the following wheel hardware varies by selection.
3500 Dually
- Sprinter 3500 Dually Wheel Adaptor & Hardware
- Genuine Mercedes Ball Seat Lug Nuts
Aftermarket Alloy
- (3) 17mm Cone-Seat Aftermarket Alloy Wheel Lug Bolts
Factory Alloy
- (3) Factory Alloy Wheel Lug Bolts
Factory Steel
- (3) Factory Steel Wheel Lug Bolts
Splined Aftermarket Alloy
- (3) “Shorty” 38mm Wheel Studs
- (3) Splined Lug Nuts
- (1) Wheel Lug Nut Key
No Hardware
- No spare tire hardware; carrier mounting hardware is included.
180˚ hinges required
Only fits vans equipped with 180˚ door hinges, identified by two circular holes in the center. Vans with 270˚ hinges need 180-degree driver-side rear door hinges; Agile offers color-matched replacements.
Door-opening clearance
Agile states that the rear door retains 180˚ of motion with a factory wheel and tire. Window flares or oversized aftermarket tires of 285+ width may contact the van’s side with the door fully opened; install the included limited-travel stops for those applications.
Drilling and reinforcement
Carrier installation requires drilling 2 small holes behind the rear door emblem. The reinforcement kit guide additionally requires drilling 8 holes through the inside door panel and specifies driver-side installation only, not the passenger-side door. Agile recommends fitting the included brace for frequent off-road use to limit tire-induced door flex and potential damage.
Tire fit
Agile lists “Fits 275+ Tires.”
Installer requirement
Agile Offroad requires installation according to its instructions by qualified personnel and strongly recommends an authorized dealer or qualified installation center.
Specs, parts & installation
Carrier and clearance
| Construction | Steel; stainless steel hardware; billet aluminum logo badge |
|---|---|
| Finish | Textured black powder coat |
| Weight capacity | Agile Offroad states: 100 lbs. |
| Depth — Sprinter 2500 | Agile states: approx. 16″ from rear glass |
What’s in the box
Carrier and door parts
- Sprinter Rear Door Tire Carrier
- Mounting hardware
- Limited-travel door stops
- Rear door reinforcement brace
- Replacement rear emblem
Wheel hardware
Wheel-mounting parts are supplied according to the selected Wheel Hardware option; No Hardware excludes spare tire hardware.
Reinforcement kit parts — linked guide
- 1 x driver-side rear door reinforcement plate
- 1 x nut plate
- 12 x flat washers
- 4 x lock washers
- 4 x 1/4 in. nylon lock nuts
- 8 x 1/4 in. -20 x 3/4 in. bolts
Installation at a glance
Agile specifies hand tools and a drill for the carrier.
For the reinforcement brace, remove the driver-side rear door panel if equipped, mark and drill the mounting points, and secure the reinforcement and nut plate with the supplied hardware.
The reinforcement guide recommends a drill-bit stop collar to prevent striking the outer door skin.
Reinforcement kit tools
- Drill and 5/16 in. drill bit
- Marker and center punch
- Door panel removal tool or plastic pry tool
Lead Time
Agile Offroad says orders may take 3 to 5 days to process and ship.
Read Agile Off Road lead time policy on WNDR BuiltWarranty
Agile exterior accessories carry original-owner materials/workmanship coverage for the duration of ownership; powder-coated finishes have 60-day manufacturing-defect coverage.
Read Agile Off Road warranty policy on WNDR BuiltReturns
Eligible returns: contact Agile within 90 days of purchase; a 10% restocking fee applies after 30 days, and customers pay return shipping.
Read Agile Off Road returns policy on WNDR BuiltWhat are people saying?
Find owner feedback, discussions, and installation videos for this product.
Searches use the manufacturer and product name and open in a new tab. Results may include similar products.
WNDR Built Community
Our community blog is coming in the future.
Community · Coming soon